Ryaano's v.1 Turbo Progress Build

[Frostydc5]

Would be cheaper to just wrap it with carbon fiber vinyl or something after you're finished. Ive wasted so much abs sheets doing little projects like these, i can't imagine how much carbon sheets i would have wasted lol

exactly lol

[Rmenjoi33]

Would be cheaper to just wrap it with carbon fiber vinyl or something after you're finished. Ive wasted so much abs sheets doing little projects like these, i can't imagine how much carbon sheets i would have wasted lol

Lol thats why you dont mess up. I was scared to mess up doing my inserts. Thats why you make sure your cardboard template fits before you cut your materials.

[ryaano18]

Lol thats why you dont mess up. I was scared to mess up doing my inserts. Thats why you make sure your cardboard template fits before you cut your materials.

You know, I should use cardboard as a template...but i just start cutting away in the hopes it fits. 26% of the time it works everytime lol

[Rmenjoi33]

yeah, when the material you are using cost 50$ a sheet of 6x24 thats a no go.

[ryaano18]

yeah, when the material you are using cost 50$ a sheet of 6x24 thats a no go.

Yup! ill stick to my ricer $10 a sheet abs lol

[Frostydc5]

Yup! ill stick to my ricer $10 a sheet abs lol

where did you get $10 sheets i looked online any good size sheet was like 35 and then the glue stuff you used on your diy was like another 35 lol

[ryaano18]

where did you get $10 sheets i looked online any good size sheet was like 35 and then the glue stuff you used on your diy was like another 35 lol

http://www.parts-express.com/abs-tex...-x-24--265-948

and the glue stuff is expensive everywhere, im placing an order right now for it. There are alternatives but it works awesome

[ryaano18]

where did you get $10 sheets i looked online any good size sheet was like 35 and then the glue stuff you used on your diy was like another 35 lol

oh by the way... to make things more expensive you need the dual pump application gun for it too lol

http://www.amazon.com/Norton-636425-...s=norton+41400

[Frostydc5]

http://www.parts-express.com/abs-tex...-x-24--265-948

and the glue stuff is expensive everywhere, im placing an order right now for it. There are alternatives but it works awesome

you da man again lol. and yeah that glue is pricey but seems worth it

[ryaano18]

Well some more spring cleaning today. Got a little bored and decided to strip more sound deadening from the car as well as remove speakers. This was alot more work than I thought. I took out the carpet, seats, old wires and also all the door speakers. I dont plan on rocking a radio for a little bit, just at least to I start doing some driving, but for now all that is gone including factory speaker wiring.





I had already done the trunk a year back so i just needed to worry about the front.



There you can see my little temporary radio block off and my future gauge setup

and after 3 hours of work...



I wasn't able to get out allll of the deadening but maybe about 95%. There is still some under the fire wall mat, and on the vertical panels that i honestly didn't feel like doing anymore lol

I did weigh all the sound deadening i did remove and it was around 12 pounds in the front section alone. speakers were another 5 pounds total, so today was a good day to drop another 17~ lbs from the car

more to come