Oil feed suggestions

[Lilwhit14]

I'd have to look closer at that is the oil sandwich plate is tight to the block ? The filter it isn't double gasketed is it ? Meaning an old gasket was stuck on there from an old filter when the new filter was installed or did the new filter have a good gasket ? Have you tried another filter ? I haven't really had any issues for the most part with mine its made by Golden Eagle .If yours is leaking it's pretty well gotta be a gasket issue one one of the sides of the oil sandwich plate or it isn't tight as it shouldn't leak massive amounts of oil . Who makes the plate your using out of curiosity ?

The only I'm seeing when searching golden eagle are the lsvtec ones. Do you have a part number or a website you got yours from? I'm just tired of leaking oil. It's caused me to have to replace my wiring harness bc oil is just everywhere and I think that's why my car is throwing an ecu failure code

[vdubkilla]

The only I'm seeing when searching golden eagle are the lsvtec ones. Do you have a part number or a website you got yours from? I'm just tired of leaking oil. It's caused me to have to replace my wiring harness bc oil is just everywhere and I think that's why my car is throwing an ecu failure code

The link I posted shows ya the one you need to get if you read the description it tells you that it has 2 oil ports one for a clean filtered connection for the turbo oil feed .Just ask them to be sure when ya order it but I'm pretty certain that's is the correct one .

[Lilwhit14]

I got the bwr one off eBay. Don't know why it's not working. I'll order some extra I rings with it. Thanks.