He sure as hell was!Quote:
Originally Posted by Spaz
I don't get the shift knob tho, is it supposed to be a mis-shift joke?
Printable View
He sure as hell was!Quote:
Originally Posted by Spaz
I don't get the shift knob tho, is it supposed to be a mis-shift joke?
yup its a misshift joke.
santa isnt done yet.
looking for a bar k20a2 head to build.
:facepalm: Glad I got the joke, I iz so smart!
Damn, how much you think you'll pick that up for Mr. Nick Claus?
haha no worries! :P Around here there are people who have done the 1-2-3-2 shift, so its a good joke here.
Im torn wether or not i want to go.
super single clutch
or
xxr 531 wheels
and before soeone says it, if we had good roads and i had 3200 bucks id have real ccws :) that money went to k series parts :P
Hmm... Clutch or wheels? What clutch are you running now? And don't worry, I'm not an advocate of baller wheels. Function>Form.Quote:
Originally Posted by boosted_teg
Id just like to change it up. had same rims for 3 years now, and they'd look good on the GFs ek (which we already started collecting parts for a k24 swap on hers)
Im impressed my clutch held up. ACT 6 puck heavy duty pressure plate. Its not slipping but its going to eventually. Might as well change it out while everythings apart. I was really set on CC stage 4 6 puck sprung, but the torque rating is at 350. Super single is good for 600, twin 800.
Super single FTW! I wish I got that instead, but I got my stage 4 CC for 300 shipped :umad:Quote:
Originally Posted by boosted_teg
Yaaaa, i didnt got with it after all. I dont plan making more then 500, 550 max. so i opted for CC stage 5 single non sprung clutch. So for 300 on the clutch i picked up a skunk2 70mm TB.Quote:
Originally Posted by Si Speed 317
Also i tore out the motor today, no pictures. Im stripping it down tommorow so i should have some pictures. Hopefully have the head dismantled and ready to be sent to get cleaned up
Started port matching the 70mm k tuned adapter to the rbc
http://a7.sphotos.ak.fbcdn.net/hphot...71568933_n.jpg
Got this today as a joke :P
http://a2.sphotos.ak.fbcdn.net/hphot...13290382_n.jpg
Been a while. Motor was pulled out, head disasembled and tranny rebuilt.
Meth kit
http://a5.sphotos.ak.fbcdn.net/hphot...62395602_n.jpg
valve cover fittings
http://a5.sphotos.ak.fbcdn.net/hphot...21096212_n.jpg
All new flat supertech valves and keepers
http://a6.sphotos.ak.fbcdn.net/hphot...94028656_n.jpg
K-tuned 5th gear lock out installed
http://a8.sphotos.ak.fbcdn.net/hphot...04659412_n.jpg
While removing my motor, i noticed my rear torque mount was a littled Effed up! Thanks Hasport! its getting replaced
http://a2.sphotos.ak.fbcdn.net/hphot...99381793_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot...56461423_n.jpg
I had my manifold and turbo housing ceramic coated
http://www.facebook.com/media/set/?s...2766739&type=3
http://a4.sphotos.ak.fbcdn.net/hphot...76107659_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphot...20519722_n.jpg
Finished porting my manifold to 70mm
http://a6.sphotos.ak.fbcdn.net/hphot...01513090_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphot...84903187_n.jpg
New OEM acura type r shift boot
http://a8.sphotos.ak.fbcdn.net/hphot...59151889_n.jpg
3rd gear looks good? no? haha
http://a2.sphotos.ak.fbcdn.net/hphot...16240365_n.jpg
All new
http://a6.sphotos.ak.fbcdn.net/hphot...67382995_n.jpg
Also installed the LSD, which i forgot to take pictures.
Mtec spring install. was fairly easy
http://a2.sphotos.ak.fbcdn.net/hphot...76308572_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot...19008535_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphot...94467013_n.jpg
S2k clutch cylinder
http://a3.sphotos.ak.fbcdn.net/hphot...54373986_n.jpg
Rods/pistons awaiting new bearings and rings
http://a1.sphotos.ak.fbcdn.net/hphot...66342749_n.jpg
Birthday is around the corner. GF got me some presents :)
http://a3.sphotos.ak.fbcdn.net/hphot...37954475_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphot...61739188_n.jpg
Then i got bored and decided to do some polishing. Did my mounts and turbo housing again
http://a8.sphotos.ak.fbcdn.net/hphot...31321797_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphot...80372837_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphot...89000122_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot...23269877_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphot...22099962_n.jpg
Then i got some more parts
http://a1.sphotos.ak.fbcdn.net/hphot...38206004_n.jpg
My spare room was filing up, so i had to buy a shelf lol
http://a5.sphotos.ak.fbcdn.net/hphot...79211441_n.jpg
Finished up my valve cover fittings
http://a3.sphotos.ak.fbcdn.net/hphot...16928473_n.jpg
My head is at the machine shop getting all new guides pressed in, valves seated, and cleaned. My exaust valve guides were BAD. im suprised i never dropped a valve
dang work is blocking your photos :(