I'll make you one
s4 IG-petefromthestreets
Cage plus radio member #1
Printable View
Nice Adam glad to see the gears
Yea man. My body could use some fresh paint but that's money I rather spend elsewhere right now.
Your the fancy one.
Thanks Mark. Been needed for a long time. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
Ditto.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Did some assembling tonight. http://img.tapatalk.com/d/14/01/23/mamatupe.jpg
I must admit that after putting the rest of the gears on the shaft it doesn't look as cool.
Z1 timing chain guide
http://img.tapatalk.com/d/14/01/23/9yhevury.jpg
Z3 timing chain guide
http://img.tapatalk.com/d/14/01/23/u7ebymyd.jpg
You can see it covers more of the top of the cam.
Had to rethink the water pump location because things look much different with the motor mostly assembled and it won't work the way I originally planned. I'll update with that once the fitting comes in.
Here's a little teaser for you.....
https://www.dropbox.com/s/9l2pkomuay...122_225547.mkv
s4 IG-petefromthestreets
Cage plus radio member #1
Wish I could watch the vid. Good stuff none the less
No way José. Im using a davies craig ewp. It is controlled by a box that you can on the fly adjust the temp of the motor.
Since its electric its variable speed and can spin slowly if the motors cold or soin fast if the motors hot. It also will keep the ewp on while the cars shut off for 2 min to prevent heat soak only if its over the set operating temp.
s4 IG-petefromthestreets
Cage plus radio member #1
Definitely man. My car runs very hot in the summer. Big ass fmic blocking my small rad with only 1 fan on it.
I now have 2 fans and this mammajamma http://www.daviescraig.com.au/Electr...0-details.aspx
s4 IG-petefromthestreets
Cage plus radio member #1
Idk about you guys but I can't stand using vacuum caps to cover unwanted coolant ports.
So I pulled the upper coolant neck and pulled out the tubes
http://img.tapatalk.com/d/14/01/24/da2y8a2y.jpg
http://img.tapatalk.com/d/14/01/24/dygu5aty.jpg
I have a couple 1/8" npt allen caps I'm going to plug the holes with. So I have to pen the holes up to .343" for the tap.
http://img.tapatalk.com/d/14/01/24/name7a6y.jpg
http://img.tapatalk.com/d/14/01/24/9usu7yga.jpg
http://img.tapatalk.com/d/14/01/24/abuqa9yq.jpg
And I always chamfer the edges for the tap to enter clean and straight.
http://img.tapatalk.com/d/14/01/24/y5eze3az.jpg
http://img.tapatalk.com/d/14/01/24/te8eregy.jpg
And of course every place local is sold out of the tap. So to mcmaster.com I go to ordrr one. Good thing is it will get here tomorrow since they are located in Nj and it only takes 1 day ground shipping.
s4 IG-petefromthestreets
Cage plus radio member #1
Nice! Make a DIY when all is said and done. This is awesome.
Ok ill make a diy on that.
Cleaned the garage out. It was a complete mess and I couldn't see the floor. But thanks to two friends and a couple hours I ended up with this.
http://img.tapatalk.com/d/14/01/25/yge5y6a8.jpghttp://img.tapatalk.com/d/14/01/25/4yde7u8u.jpg
The pics truly don't do it justice. Need to wait till the weekend to fire up the truck and get the other stuff out of the way. Then it's time to get a hustle on the tear down.
s4 IG-petefromthestreets
Cage plus radio member #1
Just want to give a huge thanks to my man [MENTION=1]BoostedK20[/MENTION] for all the help and service in parts. The beast will be getting torn down over the next few days. It's go time people! http://img.tapatalk.com/d/14/01/25/y6uvy5y3.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
:awwyeah::awwyeah:
Yes siiiiiick
After receiving my parts today I decided to work on the car tonight. I had to move cars around at my father's house to get it in the garage. I met the new neighbor who I had been previously told by my father he was a douche. I had to have my friend jump start a car and his car was running in the drive way. Meanwhile It was only 9pm. He came out and half ass introduced himself being a dick. But I handled it like an adult. He said his kids were being kept up and that they had school ect. I told him the situation and he wanted to continue to be a dick so I said it's Friday.... Your kids don't have school tomorrow. He walked off like an immature kid. The
Anyways after that I got to do a little work.
http://img.tapatalk.com/d/14/01/25/epupuruj.jpg
http://img.tapatalk.com/d/14/01/25/nuty4yru.jpghttp://img.tapatalk.com/d/14/01/25/e3e7emyp.jpg
That's how she sits as of now
s4 IG-petefromthestreets
Cage plus radio member #1
:fyea: Like a boss. Gotta hate neighbors sometimes!
My main thing is he came out acting like a douche the first time I ever met him and at 9pm talking about keeping his kids up. Fuck outta here Noise ordinance doesn't much in till 11. He's lucky I didn't rev every car until then.
But I felt I was more adult in that conversation then he was. Then he got school'd verbally without foul language so I definitely won that battle.
s4 IG-petefromthestreets
Cage plus radio member #1
Somebody lucky.
Fuel system king crew member #1
Nah dude I was fuckeddddd up. I probably would've went Largo on him. I still gotta head up to get the Yukon lmaoooooo. My head hurts.....
Fuel system king crew member #1
Text me your fathers address too.
Fuel system king crew member #1
That goes a long way man. I'm happy to have neighbors that, although I was quiet, don't mind me working on my cars or the Ruckus past 10 or 11. Hell, hkw many times was I working from 5pm-10am on the Si and the RuckRuck this past summer? Never heard a word from them. I did, however, find out that a few of my neighbors (50+ years old) smoke weed.
He doesn't wanna send it. He PM'd me explaining why. Something about smurfs, eiffel 65, and the real Slim Shady. I didn't get any of it, but for what it's worth: Ashley said you get off at 6 man, ur screwed for the day.
:rotfl:
Damn. Take a cab? Smart move man. Not worth risking lives. Abed I'll send the address but I'm not working on the car today hanging out with the gf today.
Lmmfaooooooooo
s4 IG-petefromthestreets
Cage plus radio member #1
So I started pulling things apart on the car. Got the trans out and started talking the casing apart when I couldn't get the countershaft c-clip to release from the bearing. Never once have I had that issue before. Now I'm battling getting the counter out from the casing inside. Not much luck as of yet. I was hoping to get the trans ago finished up today but that's obviously not happening.
Had to torch out my passanger side lower ball joint so that will need replaced. My oil gutter plate was wrecked so that needs replaced. The oil was littered with metal. So EVERY bearing must be replaced. Just getting better and better.... Smh.
So far I haven't found what broke in the trans yet but I assume I will once I pull the diff and countershaft. Surprisingly 1-4th looks OK from what I can see.
I'm having a problem uploading pics through Tapatalk so I'll have to do that later.
s4 IG-petefromthestreets
Cage plus radio member #1