Page 31 of 88 FirstFirst ... 21314181 ... LastLast
Results 301 to 310 of 880

Thread: *CHAT* Adios Summer, Winters Here: The Next Episode

  1. #301
    Moderator ryaano18's Avatar
    Join Date
    Mar 2013
    Location
    Houston
    Posts
    781
    Feedback Score
    0
    So i found out yesterday that you cant mix match interior wire harnesses in the RSX

    My base fuel pump clip is only a 2-pin clip, but the type-s is like a 16-pin. So i had to order a new floor harness (40 bucks). ill probably make a wire sleeving basics DIY if anyone is interested in joining the wiring crew

  2. #302
    Master Member
    Join Date
    Dec 2011
    Location
    Delaware
    Posts
    1,889
    Feedback Score
    1 (100%)
    Can anyone give me any pointer for outing my block into an engine stand? And also once the trans is off, where can I attach the hoist to on that side?

  3. #303
    Moderator ryaano18's Avatar
    Join Date
    Mar 2013
    Location
    Houston
    Posts
    781
    Feedback Score
    0
    Quote Originally Posted by aLmk View Post
    Can anyone give me any pointer for outing my block into an engine stand? And also once the trans is off, where can I attach the hoist to on that side?
    If i was home i would take a pic to show you. Pretty much you take the bar out of hoist and using the bolts from the transmission to mount it to the engine where the transmission mounts, you just have to align the mounts to the nearest holes. then pick up the motor and put the bar into the stand. if you're motor still has the crank and pistons in it you might need a friend to help you pick up the motor and put it on the stand

  4. #304
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Quote Originally Posted by ryaano18 View Post
    If i was home i would take a pic to show you. Pretty much you take the bar out of hoist and using the bolts from the transmission to mount it to the engine where the transmission mounts, you just have to align the mounts to the nearest holes. then pick up the motor and put the bar into the stand. if you're motor still has the crank and pistons in it you might need a friend to help you pick up the motor and put it on the stand
    I wonder who taught u that.

  5. #305
    Master Member
    Join Date
    Dec 2011
    Location
    Delaware
    Posts
    1,889
    Feedback Score
    1 (100%)
    Quote Originally Posted by ryaano18 View Post
    If i was home i would take a pic to show you. Pretty much you take the bar out of hoist and using the bolts from the transmission to mount it to the engine where the transmission mounts, you just have to align the mounts to the nearest holes. then pick up the motor and put the bar into the stand. if you're motor still has the crank and pistons in it you might need a friend to help you pick up the motor and put it on the stand
    Ok thanks, I'll just use my hoist to lift it up to put it onto the stand.

  6. #306
    Moderator ryaano18's Avatar
    Join Date
    Mar 2013
    Location
    Houston
    Posts
    781
    Feedback Score
    0
    Quote Originally Posted by monjarassi View Post
    I wonder who taught u that.
    It's because you're my bestie

  7. #307
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Quote Originally Posted by ryaano18 View Post
    So i found out yesterday that you cant mix match interior wire harnesses in the RSX

    My base fuel pump clip is only a 2-pin clip, but the type-s is like a 16-pin. So i had to order a new floor harness (40 bucks). ill probably make a wire sleeving basics DIY if anyone is interested in joining the wiring crew
    Always interested! Post it up!

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  8. #308
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Quote Originally Posted by ryaano18 View Post
    It's because you're my bestie
    love the avy

  9. #309
    NSFW Specialist MajorWeak's Avatar
    Join Date
    Oct 2013
    Location
    360 Washington
    Posts
    381
    Feedback Score
    0
    I know I'm a day late, but have fun at WCF, and be safe! Good luck guys, and girls!
    Daily Tuned At 261hp 193tq @ 5psi

    ~Functional Crew~

    NSFW VIP Thread
    20 Pages and Counting!
    Not a VIP? Become One Here

  10. #310
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Who is racing that day from here? [MENTION=878]civicgrl89[/MENTION] and [MENTION=56]Adm_rsx[/MENTION] are, and [MENTION=49]boosted_teg[/MENTION], [MENTION=83]vdubkilla[/MENTION], and [MENTION=921]Frostydc5[/MENTION] will be there to spectate, and I will be there on Sunday as well. Might not bring my Si though
    Last edited by Si Speed 317; 11-02-2013 at 01:54 AM.

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

Page 31 of 88 FirstFirst ... 21314181 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •