*CHAT* Nice weather, Club RSX bans, K-Swapped GTR, a Unicorn and will Rob's car ever be done chat

[Frostydc5]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk

do it! it is so worth it

[aLmk]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk

If you made a write up for doing that, that would be great. That's one thing in like afraid I'd do wrong, but I guess most of it isn't any different than like setting valve lash.

[Bottled Morphine]

I'm not sure if All In/ Speedfactory Derek is gonna start "mass producing" these "custom" manifolds...but that looks like a clear copy and paste to me.

#fastest of the hypothetical/ prospective car crew member #1

[Xander]

Not yet. I still need to check the clearance and order the shims. The trans is still sitting open. I'm debating on getting the tsx 6th gear

Sent from my SCH-I545 using Tapatalk

I could hook you up on it if you want

[Turpid Porpoise]

I could hook you up on it if you want

With the shims?

Sent from my SCH-I545 using Tapatalk

[Turpid Porpoise]

If you made a write up for doing that, that would be great. That's one thing in like afraid I'd do wrong, but I guess most of it isn't any different than like setting valve lash.

Since I have the transmission apart I could probably do one for disassembly, lsd install, tsx 6th and reassembly

Sent from my SCH-I545 using Tapatalk

[Xander]

With the shims?

Sent from my SCH-I545 using Tapatalk

I was talking about the TSX sixth specifically, but I'm sure I could help with the shims too

[aLmk]

Since I have the transmission apart I could probably do one for disassembly, lsd install, tsx 6th and reassembly

Sent from my SCH-I545 using Tapatalk

It's just the shimming that gets me... I've had my whole trans apart and swapped gears into it, but always kept the same LSD and main shaft so I never had to re-shim

[Turpid Porpoise]

It's just the shimming that gets me... I've had my whole trans apart and swapped gears into it, but always kept the same LSD and main shaft so I never had to re-shim

The LSD shim is simpler than the mainshaft shim which I have to replace this time.

[aLmk]

Don't you need a dial indicator for one of the shim measurements?