Spaz lost hope on Ivy

[Spaz]

Yes she will be N/A... thought about one of those electric superchargers lol jk

sent via spazatalk

[PetefromtheStreets]

Yes she will be N/A... thought about one of those electric superchargers lol jk

sent via spazatalk

You could always join the dark side of boost. Rotrex!

[Spaz]

Ok so tonights update.. I installed my MTEC race springs... and I'm seriously excited to try these out...


So first unbolt these four main top bolts


and this allen bolt on the side


Then pry up and pull out



Now unbolt this 14mm bolt



By looks not horrible different... but squeeze them and WOW what a difference!



Put it back together and instal...

Now instal honda Bond and put back together and call it a day




As for you non believers of me going back to NA here is my manifold...



Modified DC RH for my K24... Sorry guys no turbo...


and I reinstalled my shifter cables. Love these Hybrid Racing Cables

[PetefromtheStreets]

You'll enjoy those shifter springs. They are boss status with the hybrid cables!

[1SLOWFG2]

I have the mtec springs and they are awesome. I've been thinking of getting hybrid cables....what difference are they over stock?

[PetefromtheStreets]

I have the mtec springs and they are awesome. I've been thinking of getting hybrid cables....what difference are they over stock?

I know it wasn't directly asked to me but...
Shifting feels very precise. There is very little flex so when ripping gears your less likely to miss due to cables flexing apart. Also a little tip with cable trans cars is to use heavy duty zip ties and tie the 2 cables together. This will further prevent missing from a flexing set of cables.

[1SLOWFG2]

I know it wasn't directly asked to me but...
Shifting feels very precise. There is very little flex so when ripping gears your less likely to miss due to cables flexing apart. Also a little tip with cable trans cars is to use heavy duty zip ties and tie the 2 cables together. This will further prevent missing from a flexing set of cables.

Right on yeah mine are zip tied together I just want to know if a new set of cables would be worth the money. I may give them a shot

[Si Speed 317]

I never knew of these racing shifter springs.. Hmm sounds good to me. Pricey?

[Spaz]

I never knew of these racing shifter springs.. Hmm sounds good to me. Pricey?

cheap and easy just like me!

[Spaz]

Well some updates from last night... got my fuse box harness back and finished. So far it look great. Special thanks to my buddy Chuck





So I bored out this hole to go into the car


And started stuffing the line through to the inside


Was a real pain in the ass but it got in there





Then kinda mocked it up and bolted it down


and made a grommet fit



Now for my fuse box............. first I gutted my air bag and trimmed down the cover





Then as always customize a bracket for it to sit and mount


bend and mock up.. was a pain




welded in bolts for ease of mounting


drilled holes in fuse box panel




Now installed and test fit it all



BAM