Quote Originally Posted by marsman328 View Post
thanks homie!!



The hole in the firewall where the heasdlight/fusebox harness travels through, is at the bottom of the firewall under the brake booster. Factory location for the fuse box is in the engine bay next to the driver side shock tower.

I am extending the wires to go through that same hole, along the inside of the dash, and to the passenger air bag area where the box is mounted.

There is maybe 12 inches of wire that would let me swing the box to another location like under the driver headlight (the location that I had it mounted previously).

To mount the box where I want in the passenger air bag area I have to extend 11 wires 103", and 21 wires 73". I will need approximately 183 feet of 18 gauge wire, and 39 feet of 12 gauge wire.

I don't see how you would be able to mount you box I the same location that I am going through extending the wires. If you can successfully do this please post up some pictures, I would love to see your process. The EP is very similar wiring and component location wise to RSX
Well for starters- just from what I can see- my fuse box wiring harness does not go into the cabin under the brake booster- but on the passenger side under the engine harness. So I have a good amount of wire length to play with. I will have to see exactly how much- but I can't imagine that i will have to extend anything.


Sent from my iPhone using Tapatalk