A little update,
I entered my car into honda nationals 2016 held at winton raceway not knowing what I was getting myself into, but before that I have some small updates with the car.
I upgraded my brakes, new setup consist of the Endless 4 pot calipers, MX72 pads, PMU scr pro rotors and Endless braided lines.
For my birthday this year my gf bought me a set of tyres, Toyo R888R GG compound in 225/45r16. The GG compound is the streetable version offered by toyo uk over the more aggresive SG compound.
My brothers, cousins and friends bought me a bunch of other goodies. It was a lot to take in as I was expecting nothing, big warm thank you to all of them.
*r888r 225/45r16
*ad08r 225/45r16
*defi advance zd club package
*defi controller + 60mm boost gauge
*aem uego wide band kit
*k-tuned traction bar
Started preparing for Honda nationals.
I dived into wiring up the defi advance zd, unfortunately no finished and mounted pictures but it is fully functioning with the mishimoto sandwhich plate.
I started driving the car daily to work 5 days a week for the last month or 2 so I decided to sell the pc680 to a much needed friend and picked up a full sized optima battery. The pc680 use to sit underneath the passenger seat. The fire extinguisher was also mounted.
Got the tyres mounted, r888r on the advan rg 16x8+30 and the ad08r on the enkei rc-s as a backup.
I drove the car to the exhaust shop and while getting up their drive way I mangled both my fenders, didn't realise until i got home after a 10 minute drive.
My left side splitter bracket snapped clean, damn plastic brackets from top one, never again. David came to the aid and made me some brackets to survive the day.
Arrived at winton and started setting up the car.
Alignment was nothing aggressive.
fronts were -2.6 camber and toe out 0.6 degrees.
rears were -1.5 camber and toe out was 0.
castor was oem spec
Tyre pressure was stupid hot for 3/4 sessions at 35psi hot. Dropped it down to around 31 psi hot for the last session and did wonders.
Thanks to Alcaptures and Folk for the shots.
After the sessions I had a swarm of hands reaching into the engine bay for warmth. Atleast 6 people but only captured these 3.
Went for a toilet break to find this back at the pits...
Ready to hit the road home.
A little Recap of the day.
It was a cold day with a very wet track during the early hours, It did get dry around 2pm but heaps of mud from people coming off the track.
This is my 2nd track day overall with the 1st being 4.5 years ago with the k24 and really old ad07 tyres (1:51 as a personal best of 3 sessions). The track condition wasn't ideal for an amateur like me but I did 4 sessions with 0 issues and that was the most important things. I ended up with a new PB of
1:39.88 in my last session which is half decent I would say? I plan to hit winton again to further increase my driving skills with more seat time in the future with a built motor for longevity and reliability.
In saying that, I still had a blast regardless of weather.
Gave the car a quick foam bath to get rid of all the mud from 1 of my spin off at the track.
I didn't have a go pro mount but my friend Tam did record me on the straights. I will try to get that clip up one day.
Bookmarks