Some of you may not know what the inside of a K series engine looks like here are a few pics with some brief comments of a bone stock k 20Z1 short block tear down
Removing the rod bolts to pull pistons and rods
Pistons and rods on the table
pulling the center main bolts
a view from the bottom of the block where the oil pan normally covers
After removing the lower girdle and lifting the crank and bearings out
Lower Girdle
Lower Girdle and Crankshaft
Bare Block you can see where the oil squirters are normally located they are removed in this pic
Pistons , Rods , Girdle , Crank ,and Block
View from the top of the Bore where the Cylinder head bolts to
Bookmarks