How many psi are you running on new setup?
Tire slayer
Breaking everything since 2011
How many psi are you running on new setup?
So you are making how much on 16 psi on pump? All the graphs confused me. Lol
I just got home from Cecil. Only could make one pass, pretty disappointed about that. So many people there and so many break downs.... Waited like 2 hours in line and then I ran a ducking 12.044 at 119 :cornmad: that was hitting the limiter in second and not power shifting. I definitely would have done 11s if I had even just not hit the limiter. O well learned my lesson, back to going on Wednesdays when serious racers and less people go.
Last edited by aLmk; 10-18-2013 at 11:53 PM.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Vit told me he lost ~.2 sec ET by powershifting. Unfortunately no video of me, I want to get a go-pro. For tires I was using 24.5'' M&H racemaster slicks. I drove through the water box and did my burnout with the front wheels past the water box; this let me pull a 1.72 60'.
Well compression and leakdown came back OK. But he said he feels the noise is definitely something in the bottom end, like either piston slap, or a wrist pin going bad. He says he doubts it's a bearing as I would likely be experiencing oil pressure issues. He said he thinks the noise is worse than the last time he heard it, which was in August or so. He said the next thing to truly do is to tear down the motor and see what's going on :sadbanana: :think:
power shifting will keep the boost from dropping between shifts. I tried and checked my datalogs before. from 3-4 gear not letting off the gas, i dropped from 18 psi to 17psi. Previous run not power shifting, 18 to 9psi. It does work, however its bad on our transmissions :P
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
Bookmarks