A friend of mine had posted this information up, but was too lazy to post it here. So here you go boost buddies

Hondata wants $100 for a MAC solenoid with a Hondata sticker on it, which is cheap compared to all the EBC's on the market. Now is it really cheap? Many people have the solenoid from their AEM Tru-Boost wired in and they work just fine. In the end, the Hondata/MAC solenoid part number is 35A-AAA-DDBA-1BA. You can only get one from one of MAC's local distributors, for some reason MAC doesn't allow them to sell across state lines. Welcome to MAC Valves

Once you did that, all you need are the two 1/8" npt x 1/4" barbs and a muffler. Xenocron Tuning: PWM Solenoid Fittings kit Don't forget! You'll need to get the pins from Hondata. http://www.hondata.com/civic_pin_request_info.html I got the 10A mini-blade fuse and holder for about 5 bucks from my local radio shack and you'll need a ring terminal for the ground wire, i grounded mine with the ecu ground on the head.

Hopefully some fellow boosters can save some money here!