MPx90 JRSC 14PSI Minnesota

[easymovet]

After reading about FI on my SI for years I was just gonna buy a CT-E kit and be done with it but it doesn't leave much room for upgrade compared to the MPx90. The downside is that the MPx90 doesn't have step by step instructions so I'm a bit in over my head All help appreciated!

Goals:
1. 0-60 in < 6 seconds
2. > 300hp at the wheels
4. Catch 'em off guard

This is my build list so far: (red means already bought)
1. MPx90 $1810
2. MP to JRSC hardware kit $209
3. JR Manifold Parts: 052-167, 052-157, 052-161, 052-156, 052-550, 052-553 (leaving out the $500 tentioner)

4. Tensioner bracket and bolts, MP is gonna mod the OEM tensioner to compensate for the thickness of the bracket. $75
5. Deatsch Injectors 800cc $365
6. Plugs BKR9EIX Iridium IX $40
7. Walbro 255 pump $80
8. 3.5" pully $109
9. Belt ???
10. Flashpro $550
11. CAI
12. 4bar MAP sensor $99
13. a few bolts $20

--Cooling
- Meth or aftercooler (meth is $400, aftercooler is $800)...
- or e85 (there are ton's of stations the mid-west)

Total ~3.8k

-- Next stage:
Clutch and motor mounts (i've read that you can live without both a few months

So my questions:

1. What belt.

Thanks!