Well I know most people are doing custom turbo kits or at least combining aspects from each turbo kit. I figured I'll share my experience because I found a great way to mount a one sided intercooler while retaining the stock bumper beam. Thanks to friend SiSpeed317 for helping me with finding the right intercooler.

More or less the intercooler is of CXRacing brand. 29x8x3.5 with 2.5" In/out on one side.

CXRacing INTERCOOLER FMIC 29x8x3.5 1-SIDE Talon Eclipse | eBay

Link to where I bought it. It's a sturdy intercooler unlike most you would find on Ebay as I bought an intercooler from there previously but it wasn't cutting it properly. Now this intercooler retains the bumper's under plastic too. The way I had mounted it anchors it to the bumper beam. I went to Honda and I bought the brackets that hold our radiator in place. I drilled holes into the bumper beam and used a 1/4" size bolt with a length of 3.5". Mounts directly and the intercooler needs 2 5/8" bolts that are 3/4" long and over sized fender washer to keep it on the bracket. When mounting was complete I was very happy with the results. This intercooler is an actual nice upgrade for anybody using the Greddy Kit. For me with my custom AJP kit this fits what I need to do as I wanted a one sided intercooler. Pictures are below I hope this helps a lot of people doing Turbo builds!