I dont know yet im doing a research at the moment.
Wysłane z mojego D2303 przy użyciu Tapatalka
He does downpipe, screamer, 3" catback and cooler pipes to match too, just give him the car and your turbo and builds it all to fit.
Will need to relocate heater hoses, heater control, fuel feed, brake booster hose though. But you will have to do this with any sidewinder,
Sstream- where you from
I dont know yet im doing a research at the moment.
Wysłane z mojego D2303 przy użyciu Tapatalka
I will need downpipe as well but dont now where from😀
Wysłane z mojego D2303 przy użyciu Tapatalka
Ah bugger your location may make the manifold difficult from solid fab, maybe worth asking though. He usually asks to build on the car for perfect fitment. Couple of lads on the UK forum from NI/ROI maybe able to point you in the direction for a good mani/downpipe combo that doesn't mean coming to the mainland.
Most buy a manifold and make their own downpipe though.
I will not give up:-)
Wysłane z mojego D2303 przy użyciu Tapatalka
Full Race make one for your application?
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
[MENTION=1228]sstream[/MENTION], if you can reach out to some of the UK guys, bring them on here and post up. That way, others can find this easily and get all the info in one spot, rather than having to do all the work you're stuck doing.
We're helping as much as we can, if those guys post on here we can surely get to the bottom of this sooner!
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Biggest problem is all honda guys in uk go to tdi north garage and pay fortune to do it and they want say to much or help.Im gonna do it myself.
Wysłane z mojego D2303 przy użyciu Tapatalka
We're here to help. Provide us with pictures of your engine bay, front, drivers/passengers side, back of the bay by the firewall, and a horizontal one so we can see what needs to be avoided and worked around. We'll do our best to eye it out with what manifolds might fit and make a selection from there. Easiest case might just be a top-mount. We'll see
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Bookmarks