why are you running 4 port boost solenoid? just curious
hmmm. I will look into that.
thanks for the info
Support Innovation, Not Imitation
why are you running 4 port boost solenoid? just curious
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
4 port helped vitviper car spool up faster. My boy Chris got some from Vit so I am assuming so did he. Its on 8thcivic under turbocharged. He has a graph that his psi came on 2000rpms faster. Also those ppg gears are high as fuck! 1-4th is 3500.
Not only a faster spool, but the 4 port allows you to achieve higher pressures with lower rated springs. For example Vit was able to achieve like 22-23psi with a 3psi spring. The makes boost by gear much more effective.
Awesome build, can't wait to see how it performs!
I will save ya a trip from going to 8th, I hate that place
Support Innovation, Not Imitation
tranny is assembled
Support Innovation, Not Imitation
Looks amazing .. saw this over on k20a a few hours ago .. really want to do this once I build a tranny!
Nice transmission. Clean. What were your paint preparations?
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
its pc'd.
they cooked it in an oven at 400 to burn off the oil, sand blasted case. cooked for another hour at 400, then soda blasted to relieve all the impregnated oils
looks tits, and the pc is guaranteed for life.
Support Innovation, Not Imitation
I cannot rememeber if you listed it but what gears did you go with and where did you get them from?
Bookmarks