so you have your flashpro hooked up at all times?
Hopefully this will be my last build thread for this car! I have recently convert to the new SRT "Revised" kit. They keep joking with me at the shop that every oil change I seem to get a new turbo kit installed. :wheee:
Finally, I can concentrate on the external projects at last.
The car dyno was completed on 3/26/11 and once again it hit some great numbers. Thanks to everyone at SRT!!! Great Job!!!!! Listed below are a few pics and updates to my mod list. Hopefully I should have some more pics and video soon!!!! and possible a race gas tune very soon!!!:woowoo:
Thanks for looking!! Hopefully can finally meets some of you peeps this year between all the track/meet events planed for 11!!!
Current MOD List
Engine/Drivetrain
Engine1
- Darton Sleeved Block (88mm bore = 2092.3cc)
- CP Pistons (9:1) with full skirt
- Carillo Rods
- Type S oil pump
- ACL Racing Bearings
Engine2
- Stock Honda block with Golden Eagle Block Guard (Stock Bore)
- Arias 9:1 pistons
- Pauter Rods
- Type S oil pump
- ACL Racing Bearings
- Cometic Gaskets and Seals
- Modified stock oil pan
- ARP Head Studs
- SRT 1000cc injectors
- SRT Fuel Rail
- SRT RACE manifold (*latest)
- 46mm Precision wastegate
- Custom Head Work - Stage 3 port
- Carrillo Springs, retainers and Valves (1mm oversized)
- Kelford CAMS
- SRT Fuel Return system with custom SRT Hanger
- Dual Walbro 255lph intank fuel pumps
- PT6265 Billet Compressor (.82 A/R housing) vbanded turbo
- TiAL BOV
- Hybrid Chain Tensioner
- Stainless Stell braided oil supply.
- 4" high flow cone filter
- Hondata FlashPro with 4bar map sensor
- All mandrel bent Full Polished aluminum intercooler piping with bead rolled ends
- 4.5" Swift Racing Intercooler (Black)
- NGK Iridium Plugs
- Competition Stage 4 Clutch and lite flywheel
- 3" Racing downpipe
- 3" Front midpipe
- vibrant 3" Catback with black exhaust
Exterior/Suspension/Brakes
- Custom Lights projectors - Dual projector setup with 5K HIDS (Customlights.com)(Custom paint to match the car and a blend of matt'd black to accent)
- VARRSTOEN 2.2.1 18x8 Matte Black
- Continental ExtremeContact DWS 245/40/ZR18
- Complete LED light replacement
- Ultra Light Lugs
- TEIN basic coilovers
- SRT Back brace
- EBC slotted rotors
- EBC Yellow Stuff Brake pads
- SRT battery holder
- Stainless Braided brake lines (Front/Rear)
- G2 Black painted calipers
- ARP wheel studs
- Hybrid Shifter Bushing
- 15" Drag Slicks
- 15" Drag Rims
Interior/I.C.E/Other
- Poineer AVIC-Z120BT 7" touchscreen/DVD/NAV
- Poineer CD-IU50V USB Interface cable
- Poineer GEXP20HD HD Radio
- Metra Axxess ASWC Universal Steering Wheel Control Interface
- Autopage system with remote start
- Superwhite LED dome and map lights (rear also)
- Scosche SAHC634 Door Adapters
- Tsuanami 4 channel RCA’s
- Tsuanami 2 channel RCA’s
- Kicker KS650.2 component speakers (6.5)
- Kicker KS502 component speakers (5.25)
- Kicker DX500.1 monoblock class D amp
- Kicker DX400.4 4-channel amp
- Kicker NS12L34 12" Vented sub enclosure
- Tsuanami AMP 1040D multi-amp installation kit
- Absolute CAP 200 (Black with Blue)
- Speed lead kit (Multi speaker wiring harness)
- 2 gauge holder on dash from Excelerate
- Blitz Boost Controller
- Blitz Boost by Speed Controller
- Blitz Turbo Timer
- Daytona Wideband gauge
- RaceLogic
- Glowshift Elite 10 (Fuel & Oil Pressure gauge)
- Escort Passport 9500ix
- Escort ZR4 Laser Shifter
- Custom Racing boot shifter
- Mimo & Lilliput Headrest Mount
- CentraFust Auto Navigation Edition for North America
- HP Slate 500 with Windows 7
- Plextor Blu-Ray USB drive
- Corsport Short Shifter
- Complete RED LED light conversion from KMM. Special thanks!
Immediate Future MODS
- Mugen Body kit
- Carbon Hood
- HFP LIP (Front & Rear)
- Tinted Windows
Enjoy!
so you have your flashpro hooked up at all times?
what kind of screen is that you have that displays your hondata?
The screen is dope it reminds me of the one Brian had on the r34 in f&f
Very nice build dude!!!
Hell thats some great numbers!!!!
**** yeah those are some sick numbers. Have you taken this beast to the track yet ?
Well.. it looks like the body work will have to wait!! Went to Honda day in Maryland last Sunday and it didn't turn out too well.. Broke 1-4 along with my sycnros.. oh well.. Having the tranny rebuilt so I can attend the Honda day at Atco this weekend!!
Nice! If you go to Atco this Sunday, I'll see you there! Are you putting in albins/ppgs? Or oem gears?
Bookmarks