That's a lot of boost for 4k rpm out of a blower!
Here is a few quick pictures of the car all put together. Will make a build thread this week. On the highway it was pushing 9 psi at 4000rpm. So number are looking good up till now. The car is at a local car this weekend , next to boosted teg , a fellow member here.
Sent from my iPhone using Tapatalk
That's a lot of boost for 4k rpm out of a blower!
That's what the tunning guy said
Sent from my iPhone using Tapatalk
Ya you'll probably need to slow the blower down.
Cruising in the highway no boast was produced from what kpro was saying on when accelerating I got the boast like it should .
Sent from my iPhone using Tapatalk
Thats a diff story then. Depending on your pulley setup and vtec crossover point- 9 psi sounds normal. Mine will peg 12ish before the crossover around 3600rpm.
Sent from my iPhone using Tapatalk
changing stock small k20a crank to larger rsx/ep3 crank for more boost.. any disadvantages??
Last edited by beppe; 04-11-2014 at 06:47 PM.
9psi max without cooler be safe?
should have asked disadvantages of changing to larger crank than smaller sc pulley?
Bookmarks