Some of you may not know what the inside of a K series engine looks like here are a few pics with some brief comments of a bone stock k 20Z1 short block tear down

Removing the rod bolts to pull pistons and rods



Pistons and rods on the table



pulling the center main bolts



a view from the bottom of the block where the oil pan normally covers



After removing the lower girdle and lifting the crank and bearings out




Lower Girdle




Lower Girdle and Crankshaft



Bare Block you can see where the oil squirters are normally located they are removed in this pic



Pistons , Rods , Girdle , Crank ,and Block



View from the top of the Bore where the Cylinder head bolts to