Results 1 to 5 of 5

Thread: K-TUNED Billet RSX Shifters instock

  1. #1
    BoostedK20 Sponsor bodyman's Avatar
    Join Date
    May 2012
    Location
    Autofair Honda
    Posts
    116
    Feedback Score
    0

    K-TUNED Billet RSX Shifters instock


    us on FACEBOOK




    K-TUNED Billet RSX Shifter box

    KTD-RSX-SFT

    Application: 2002-2006 RSX, 2001-2005 Civic EM2/ES, K-swapped EF, EG, EK, DC2

    The K-Tuned Billet RSX Shifter Box is a direct replacement for the oem 2002-2006 RSX-S shifter box which can also be used in many K-swapped cars. The box has been designed to work with both factory and aftermarket shifter cables. If you are currently using an oem shifter box you are probably already familiar with the excessive “play” or “looseness” that is found in the factory plastic box setup. Our full billet design is extremely strong and designed to eliminate any flex or movement of the shifter unit.

    Our Billet Shifter Arm is integrated and has been redesigned to make fine adjustments to the spread of the “H” shift pattern. Essentially this feature allows the user to widen the spacing between 1st, 3rd and 5th gear. Note that 2nd, 4th, 6th and reverse gears will also be spread apart when adjusted. We have also developed a proper short shifter option that won’t damage or break the cable guides. This is accomplished by making the shifter cable mounting point adjustable to correct the angle at the cable connection. The shift lever and shifter ball are made from solid stainless steel and seated in a spring loaded brass socket. This combination of stainless and brass allows the two materials to lap together while the springs push up and eliminate “play” at the ball. The lever is fully adjustable in height and offset rotation. Height can be adjusted up to 2” taller or shorter than stock and there is an amazing 90 different offset positions.

    The Billet RSX Shifter has two different sets of mounting holes on the base so it can be easily bolted into several applications. Mounted into a 2002-2006 RSX (outer holes) and it will still fit perfectly below the RSX center console. It can also be used on most K-swapped cars that are using some type of shifter mounting kit (outer holes used again). However, it also has a set of inner holes that will allow it to be installed directly on top of the interior exhaust tunnel without the need for a mounting plate. In an EF/EG/DC2/EK the inner set of holes at the back of the shifter line up with the holes used for the factory D or B-series shift linkage. Shave down the lip for the shift boot and drill 2 more holes for the front and you’re done.


    $395 shipped !! Instock ships same day


    Paypal is hondaparts@autofair.com
    **please put your screenname and parts info in the paypal comment box when ordering**

    http://afhkparts.com/shop/k-tuned/bi...x-shifter-box/






  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Senior Member Frostydc5's Avatar
    Join Date
    Jul 2013
    Location
    NOVA
    Posts
    1,008
    Feedback Score
    0
    like i said in the PPG group buy thread if only money grew on trees

  5. #3
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    such a sexy pc!!!

  6. #4
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    i played with one of these today at Honda. Its a very nice piece
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  7. #5
    Newbie jdmdomo's Avatar
    Join Date
    Oct 2014
    Location
    956
    Posts
    21
    Feedback Score
    0
    I want one !

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •