i like the wing to match the body, IF its the mugen one. OR can you paint the side and only have CF in the center section?
i like the wing to match the body, IF its the mugen one. OR can you paint the side and only have CF in the center section?
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
since you have a white car, the cf or the all white would look really good. Love the ep3 though!
Last edited by MajorWeak; 10-24-2013 at 12:29 AM.
that was one of the best things i did, reclear my carbon fiber, except now the heat of the turbo and manifold "melted" the clear
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
Damn that sucks! I'm going to add spacers to the hood bolts to raise the back up to let some of the heat out until i can get the vented mugen on re-done.
The mugen on is primed I took it to a shop to get painted, check in one day after a couple weeks and the hood was still primed. Took it back cause the turn around time was not as quoted. So, its in the car part room. I need a shop to sand off the prime and re-clear it.
A couple of updates..
I bought a 3inch unforgettable test pipe, adding spacers to hood to raise rear to let some heat out.
Since I like to be different. I will be making widebody style front fenders. Hoping the end product will look like this.
They wont stick out that far but they will be open vented as shown minus the crazy shit going on at the bottom. I will post my blueprint design with i finish them up. This is a longer term project.
Last edited by MajorWeak; 10-25-2013 at 05:01 PM.
Here is the drawings I came up with. I will be modifying the oem fenders into them. Once complete I will make a mold and make a set out of fiberglass. Let the journey begin.
The vented gap will be about 1 inch.
Last edited by MajorWeak; 10-26-2013 at 12:11 AM.
Love it... I'm sorry but out of all the hatches i love the ep3 the most just cause all the others are over played nice ride man
wow man in for the fender project. I spaced mine out 5mm's but i want a nice bulge ontop of the tire.
http://farm8.staticflickr.com/7281/9...5ab21aee_b.jpg
Bookmarks