Page 1 of 4 1 ... LastLast
Results 1 to 10 of 35

Thread: Need trans help!!!!!

  1. #1
    Newbie froggyfredd's Avatar
    Join Date
    Oct 2012
    Location
    columbia south carolina
    Age
    30
    Posts
    47
    Feedback Score
    0

    Exclamation Need trans help!!!!!

    Alright fellow boost lovers today I rebuilt my trans from a broken second gear I replaced 1-2nd with ppg gears and got just new case bearings because all the neglect bearing in the shafts appeared ok, I also got synchrotech carbon sychros. Long story short I put it all in and in neutral clutch depressed there's no noise but let the clutch out a ticking noise come from it sounds like the top of the trans where the shift assembly goes but who knows exactly. I've come to the terms I must pull the damn thing out again but any ideas what it could be I've rebuilt it a couple times before with no huge issues other than blowing the teeth off second but I know I'm only human and could have made a simple error. I've seen people say u have to grind down ur reverse shift fork with ppgs but I wouldn't see why, any input is helpful guys thanks

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Newbie froggyfredd's Avatar
    Join Date
    Oct 2012
    Location
    columbia south carolina
    Age
    30
    Posts
    47
    Feedback Score
    0
    The issue was the reveres fork riding on first because I guess the ppg gears are slightly larger. So if you buy these grind your reverse shift fork down so you done have to do what I did, got her back up and running though after 3 months woot!!!!woot!!!!!

  5. #3
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    thats good man same thing happen to a buddy of mine with those ppg gears that thing came out 3 times b4 we got it rite.

  6. #4
    Newbie froggyfredd's Avatar
    Join Date
    Oct 2012
    Location
    columbia south carolina
    Age
    30
    Posts
    47
    Feedback Score
    0
    Yeah man playin the put it in take it out game gets old fast lol I bought them through Kmod and will never do business with them again since he would rarely respond to my emails about the where abouts of the gears and then I had this issue and he didn't respond till this evening when I bitched and said I wasn't goin to buy anything from him again. He tried to say the shimming of my trans must be screwed up cuz he's never had to grind anything down I just can see how vertical shimming on the shafts would prevent horizontal contact between and fork and gear.

  7. #5
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Quote Originally Posted by froggyfredd View Post
    Yeah man playin the put it in take it out game gets old fast lol I bought them through Kmod and will never do business with them again since he would rarely respond to my emails about the where abouts of the gears and then I had this issue and he didn't respond till this evening when I bitched and said I wasn't goin to buy anything from him again. He tried to say the shimming of my trans must be screwed up cuz he's never had to grind anything down I just can see how vertical shimming on the shafts would prevent horizontal contact between and fork and gear.

    yea i have heard bad stuff from them thats sucks doh cause how hard is it to help a customer when in need, its not like it takes hours to respond to ab inquisition.

    Wish i would have seen this earlier i wouldve shined some light man,

  8. #6
    Newbie froggyfredd's Avatar
    Join Date
    Oct 2012
    Location
    columbia south carolina
    Age
    30
    Posts
    47
    Feedback Score
    0
    No big deal man at least our trans are fairly simple I was just freakin out cuz these gears wiped out like all my savings lol and I didn't wanna hurt them. Oh and I forgot to mention he had plenty of time to post videos on fb (which is where I messages him) of him drag racing SMH.

  9. #7
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Quote Originally Posted by froggyfredd View Post
    No big deal man at least our trans are fairly simple I was just freakin out cuz these gears wiped out like all my savings lol and I didn't wanna hurt them. Oh and I forgot to mention he had plenty of time to post videos on fb (which is where I messages him) of him drag racing SMH.
    dang thats horrible customer servive

  10. #8
    Newbie froggyfredd's Avatar
    Join Date
    Oct 2012
    Location
    columbia south carolina
    Age
    30
    Posts
    47
    Feedback Score
    0
    Quote Originally Posted by monjarassi View Post
    dang thats horrible customer servive
    Agreed sir lol

  11. #9
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    how you liking those syncros??

  12. #10
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Im looking to build my 5speed and want to try those out

Page 1 of 4 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •