But i did find out that they do make an adaptor plate like a spacer for the 72mm dbw throttle body
You can make 700-800 on stock tb and manifold
But i did find out that they do make an adaptor plate like a spacer for the 72mm dbw throttle body
i was going to stick to my OEM tb aswell but the new IM wont allow me to do so
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
IMO is waste of money unless you planning making the most power you can like 1000-1300... People make 800-900 on stock rbc and tb
not true they make three models
I agree. IMO if you charge piping is still 2.5'' then that will just become the restriction. And with turbo setups we are blowing through the throttle body so it needing to be really big is less of a concern than for someone that is NA or has a roots blower that is after the throttle body.
i just went from RBC and 70mm to AFI and 90mm tb. We'll see what kind of improvements it makes on the dyno. Nothing else is changing, so should be good back to back comparison. I got it pretty cheap and it'll clean up the bay quite a bit
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
Bookmarks