Thanks- not looking good as of now.
Sent from my iPhone using Tapatalk
Damn man that really blows, hope that company responds to ya bro
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Thanks- not looking good as of now.
Sent from my iPhone using Tapatalk
Wow, that's a crazy situation. Please keep us all in the loop, and do your best to keep a positive mindset. Where there's a will, there's a way. Hope that sheds some light into the darkness.
Need parts for your k-series setup? Check out our eShop! Click Here
For all your eShop support needs:BoostedK20.com eShop Support Forum
That's no good... Hoepfully they take care of you in regards to the blower and perhaps the motor just needs to be disassembled and cleaned.Originally Posted by bluEP3_SC
Worst case possible. Charger devoured itself internally and the pieces made their way into the motor. Blown charger and motor... We like to call that SOL. Pics dont do it justice... RIP.
View of the valves. They are coated in aluminum shavings
View of the aftercooler as i removed it... Covered with chunks of aluminum from the chewed up rotors
The charger. Looks like the bearing failed and the rotors walked into the casing and chewed everything to pieces. Remember this is a freshly rebuilt, modded charger from Stiegmierer...
Just for fun- full tear down in the drive way. Look for a part out soon more than likely
Dont know where to go from here- the blower is toast though. Maybe stiegemeier will make it right maybe not idk yet. Just gotta figure out what to do with the car.
Sent from my iPhone using Tapatalk
Yea we will see- i think the blower is unfixable judging by how torn up the rotor pack and casing is. The motor has no compression in 3 cylinders so i think it might need a rebuild... We will see
Sent from my iPhone using Tapatalk
Pulled the motor and tore it down. It looks pretty good- no major damage. Im going to rebuild it regardless... Just need to figure out what im gonna build it for
Sent from my iPhone using Tapatalk
wow u work fast, props, and well you can always join the dark side
:cough:
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Lol we will see... Im looking into it nowwow u work fast, props, and well you can always join the dark side
:cough:
Sent from my iPhone using Tapatalk
Wow, that was fast! Nice work! Were the piston rings just damaged? And the vales?Pulled the motor and tore it down. It looks pretty good- no major damage. Im going to rebuild it regardless... Just need to figure out what im gonna build it for
Sent from my iPhone using Tapatalk
Pistons/ cylinder walls look fine- minus the aluminum shavings on the piston crowns. The head looks like it will need some work- there are shavings stuck in the valves, which would explain my lack of compression in 3 cylinders. Im going to look into a fresh rebuild- something that will support some more boost
Sent from my iPhone using Tapatalk
Posting Permissions
Bookmarks