I believe it's a valve guide going bad... cause I'm starting to blow smoke out exhaust and oil leaking in bay
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
Had the same prob wif the stock z3 guide in cyl 4 was allowing oil to seep by when hott
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Hmm I am having an oil leak that looks just like yours spaz, right around the bolts of the hotside. I haven't torn into it yet, I'm interested in seeing what you figure out.
Last turbo I had leaked in the same place too. I figured it the turbo seals, but now it's got me thinking.
I'll be putting it back together tomorrow
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
Well I have that old 10 part video on how to pull the transmission and engine but I never made one on how to re-install the transmission. Since I blew second gear yet again I decided I would record the install.
I apologize and it's a new camera and my shop fan was turned on and holy crap it picked up that noise horribly! I actually made a comment to my GF that I want to take it all apart to redo the video and she about killed me
Anyways, here's my quick video. Took me around 4 minutes to pop that transmission into place.
https://www.youtube.com/watch?v=cAZP...ature=youtu.be
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
sweet
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
So I went to Another Level Car Show this weekend in Schaumburg IL. Took 1st place best Acura. Had a great time. Instead of uploading a bunch of pictures I just made a quick picture video.
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
So I'm Port Matching another RBC intake manifold for a customer.
These are just some starter photos. I'm boring out to 70mm and port matching runners
started with runners. Mocked up gasket to check and mark how much to cut out
My goal is to clean up the runner smooth compared to factory rough
So I started removing material
And then smoothing out the runners like so
More Pictures of the runners almost finished.
Now onto the TB
Mock up the gasket
cut lines
Porting out to 70mm
See this nipple.. I want it gone
So I started removing it
Now time to smooth out the plenum
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
Bookmarks