Page 1 of 16 111 ... LastLast
Results 1 to 10 of 159

Thread: Si Speed 317's 400whp Daily Driver

  1. #1
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)

    Si Speed 317's 400whp Daily Driver

    Many of us go through tragic events in life, and family are the closest people to you during those events. They make you smile, laugh, and forget about the bad. I want to thank my 8thcivic family for wishing me the best and a speedy recovery since my accident in April of 2010.

    Also, my turbo build is dedicated to a fallen 8thcivic member, Tobie Cook (sh33t 0f p4p3r).



    RIP Tobie - You're always in our thoughts and prayers :bighug:

    For those of you who aren't aware, click here: http://www.8thcivic.com/forums/8thci...und-tobie.html

    Thank you to Supa Ninja (Neener), Soxfan143(Mike), BlueSi4(Oriol), and anyone else who has helped me get to where I am now. I know the tons of questions weren't easy, lol. :grouphug:

    __________________________________________________
    8.31.11 - 30R Teaser
    3k-7k, 6psi. Awesome. Redline pull video soon.


    SRT One-Off Top Mount Manifold, Downpipe, and Dumptube
    Before Heatcoating


    Drag Setup
    Nitto NT555R Drag Radials on the front - Looks mean as hell


    New wheels - Rota Grids 17x9


    8thcivicfest 2011



    v v When we first got there v v





    BoostedK20 Mini-Meet




    End of Winter Photoshoot














    3rd and 4th Gear Pulls, 2/10/11


    Update 2/21/11: Purpulicious Awesomeness








    Update 2/18/11: New Shoes
    New wheels, Stern 17x8.5 +35. Can't wait to install!

    Old Wheels:


    Update 2/7/11: GO-Power Suspension


    Winter Fotoshoot
    Winter Mode






    ClubRSX Meet 11-7-10
    Winter wheels. HFP Rear Lip and Side Skirts will be installed next week






    __________________________________________________


    Parts Received:
    Engine Management: Hondata FlashPro
    Intercooler: CXR Single Sided 29x8x3.5 (Maintains OEM bumper support)
    Intercooler Piping: GReddy
    Motor Mounts: Injected OEM
    Blow Off Valve: HKS SSQV
    Boost Solenoid: MAC
    Injectors: FIC 1000cc, PnP Clips for FIC 1000cc
    Fuel Pump: Walbro 255lph
    Gauges: AEM Uego Wideband and GlowShift Boost
    Brakes: EBC F&R Blank Rotors, Hawk HPS Front Pads, Centric Heavy Duty Rear Pads, STOPTECH SS Front Brake Lines
    Manifold: One-off SRT Tubular Top Mount
    Turbo: GT3076R
    Wastegate: 38mm TiAL Sport
    Downpipe: 3" SRT
    Oil Return: TSI kit with ATP 5/8" barb oil return
    EVAP Check Valve: USPlastics
    Map Sensor: Hondata 4 bar
    Heat Reduction: 12" x 24" Reflect-A-Gold Foil
    Intake: 4" Custom
    Misc Turbo Parts: 14mm Banjo Bolt for coolant lines x2
    Gaskets: 5 Bolt discharge; T3 inlet, exhaust manifold, oil return
    Lines: Oil Feed(-3an Oil Inlet with .035 restrictor, -3an Braided Stainless Line, -3an to 1/8" NPT, 1/8" BSPT to 1/8" BSPT & NPT for oil pressure sensor)
    Exhaust: 3" Full Race
    Spark Plugs: NGK BKR9EIX
    Intake: 4 ply Silicone Coupler
    Heat Reduction: JetHot Coating on Manifold, Turbo hot side, and Downpipe
    Catch Can: Moroso Breather
    Hottness: HFP Side Skirts, Custom Purpul Valve Cover and Shocker, I <3 HATERS and Got Boost? Battery Tie Downs, HFP Rear Lip, Viper 5901 Alarm
    Suspension: GO-POWER Suspension; currently 8k front, 10k rear.

    On the way:



    Parts Remaining:
    Clutch: Stage 4 CompetitionClutch and OEM Throwout Bearing



    Link List
    Clutch: Competition Clutch Stage 4 - Strip Series 1620 Clutch Kit - Import DPS Online - Your Import and Sport Compact Performance Source - Free Shipping All Orders Over $100
    "when you add to car use coupon code "COMPK20" and it will drop it down to $325 with free shipping"
    Manifold Studs (OEM): Part 14 Honda Automotive Parts
    And the nuts: Part 7 Honda Automotive Parts
    Walbro 255lph Install: http://www.8thcivic.com/forums/force...-pump-diy.html


    Oil Feed Line
    -3an Oil Inlet fitting for GT28R with .035 restrictor built in: -3 size Oil inlet fitting for GT28/30/35R with built-in restrictor : atpturbo.com
    -3an Braided Stainless Oil Feed Line: -03 Oil Feed Line, Braided Steel Line With female (flare/JIC/AN) swivel ends 24 INCHES long : atpturbo.com
    -3an to 1/8" NPT for Oil Sandwich Adapter: Straight 1/8" NPT to -3 AN : atpturbo.com

    Gaskets
    T25 Inlet Gasket: T25/GT25 Inlet Gasket : atpturbo.com
    5 bolt Downpipe Gasket: Gasket, 5-Bolt for Garrett T25 Flanged GT28/30R-WG Turbine Housings : atpturbo.com

    Turbo Misc:
    3" Intake Inlet Adapter: Inlet Adapter 3" racing , for GT28R and other 2 bolt Garrett Housings : atpturbo.com
    2" 3 bolt Outlet Adapter: 3 bolt outlet adapter - GT28R/GT25R/T25 Compressor, aluminum : atpturbo.com
    Wastegate Actuator 6-7psi: Wastegate Actuator 6-7 PSI Rating (GT28R style with integrated bracket) : atpturbo.com
    14mm Banjo Bolt for coolant lines x2: 14mm Banjo Fitting Set for coolant lines - 3/8" Barb : atpturbo.com

    Hondata 4 Bar: Xenocron Tuning: Hondata 4 Bar Throttle Body Mounted Complete Map Sensor, ***embled and Ready to Plug and Play on your B, D, H motor with a Throttle Body Mounted Map Sensor #[Hondata 4Bar]

    JAZ Catch Can: Xenocron Tuning - Jaz Products Overflow and Breather Tanks for Racing

    EVAP Check valve: 1/4" KynarŪ Standard Check Valves | U.S. Plastic Corp.
    Last edited by Si Speed 317; 09-08-2011 at 02:39 PM.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Junior Member
    Join Date
    Mar 2011
    Posts
    56
    Feedback Score
    0
    sweet.

    ill have to post up both of my build threads LOLOLOL

  5. #3
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    You should lol

  6. #4
    Newbie
    Join Date
    Mar 2011
    Age
    30
    Posts
    14
    Feedback Score
    0
    Nasty build man ! I love the purple valve cover, it actually fits right in and looks killer.

    Once my SRT kit gets here and I have time to install (around beginning of May) I will post a build thread.

  7. #5
    Newbie Yoklus's Avatar
    Join Date
    Mar 2011
    Posts
    24
    Feedback Score
    0
    sup man! this site looks legit. just need some of the other guys to come on over. your car looks sick man!

  8. #6
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Quote Originally Posted by bmnorm2 View Post
    Nasty build man ! I love the purple valve cover, it actually fits right in and looks killer.

    Once my SRT kit gets here and I have time to install (around beginning of May) I will post a build thread.
    Thanks man, I thought the matching shocker was a nice touch Yea you should definitely post up once your kit is in. You can even post up in the mean time with any questions or informative posts.
    Quote Originally Posted by Yoklus View Post
    sup man! this site looks legit. just need some of the other guys to come on over. your car looks sick man!
    Glad you like the site, I think it's a good spot for us boosted members (turbo or supercharged) And the more the merrier when it comes to more people!

  9. #7
    Senior Member fre$h si's Avatar
    Join Date
    Mar 2011
    Posts
    299
    Feedback Score
    0
    ya fck 8th gen lol hey did u run st8 jdm when u guys met?

  10. #8
    Newbie
    Join Date
    Mar 2011
    Posts
    1
    Feedback Score
    0
    Niceeeee bro. Cant wait for this Friday when my turbo actually hits the dyno!


  11. #9
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Quote Originally Posted by fre$h si View Post
    ya fck 8th gen lol hey did u run st8 jdm when u guys met?
    And no we didn't race, but it would have went my way because he has absolutely no traction 1-4. I would somewhat hook in 3rd and hook in 4th (both of us were on stock wheels and 215 tires). Now I have 245's and hook in 3-6 and mostly 1-2. BBG FTW!
    Quote Originally Posted by davecivic91 View Post
    Niceeeee bro. Cant wait for this Friday when my turbo actually hits the dyno!

    Thanks bro, and yea I can't wait! Make a build thread! Why aren't you guys introducing yourselves in the intro section lol

  12. #10
    Newbie
    Join Date
    Mar 2011
    Age
    30
    Posts
    14
    Feedback Score
    0
    ^^ so are you running waste gate spring pressure for 1-2?

Page 1 of 16 111 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •