Makes this noise sometimes when I hit the brakes. Not sure why, maybe MC? Listen:
http://db.tt/I2z0Zj7I
Makes this noise sometimes when I hit the brakes. Not sure why, maybe MC? Listen:
http://db.tt/I2z0Zj7I
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
It sounds to me like the pivot ball on the clutch fork making the noise
oh its been a long day lol your post says braking noise ahhhaa disregard that last post
Last edited by vdubkilla; 05-13-2013 at 12:27 AM.
Well I'd say you should get somebody to help ya out and pull those wheels and have a look maybe one of the caliper slides are jammed up
I'm not as familiar with that as I'd like to be, but here are more details:
The noise comes from both front wheels. Well, brakes. I can't pin-point where though, I haven't had another person around to push the brakes for me yet. And this all started once I did a rolling brake test from ~40mph. I continuously/steadily pressed in the brake pedal, going from a mild to a hard stop. Afterwards, clicking occured. The next day I bled all brakes with fresh non-silicone based DOT4 fluid, started with the RL, RR, FR, FL. Went away, and came back a few days later. There are no visible fluid leaks, my MC hasn't lost any fluid.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
weird noise for sure. Nothing i can think about would make a noise unless its a slider sticking. did you get under your dash and press the brake to see if the noise is there?
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
It's been an on-and-off kind of thing. I'll take it to my mechanic next week to get it checked out. I just HATE not doing things myself, and leaving my car with other people - even a reputable shop. No one cares for your car like you do.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Still have yet to get this checked. I feel like this only happens after I boost... Brake booster issue?
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Bookmarks