Pics to come... just got to upload new pics.
Bought the car in May of 2012. I was telling myself I was gonna stay stock lower it and throw some wheels on it. Well, I got pulled back into the game. lol 1 month later I started buying stuff and decided to Boost this bitch! lol
Started off with this. Bought it all stock. Added an AEM Intake and lowered it on Tein H-Tech's. Then, I just went crazy. lol
Here's my current mods.
Bought Stock in May of 2012
Civic Si Sedan
378 whp / 239tq w/ Drag Cartel 2.2 cams (with low revving because of the new motor. I'll update the numbers when I Dyno it again in the Spring when the motor is ready for high revving.)
Engine/Performance Modifications
Kraftwerks Supercharger
Drag Cartel 2.2 Cams
Supertech Springs and Retainers
Changed the Wrinkle Black Valve Cover to a Red JDM Valve Cover w/ Wrinkle Black intake
Skunk 2 Alpha Header
Full Race Exhaust
Hasport 70a Motor Mounts
Skunk2 Fuel Rail
Competition Stage 4 Clutch
Red Mishimoto Radiator Hoses
Walbro 255 Fuel Pump
Grams 1000cc Injectors
AEM Wideband A/F & Boost Gauges
Hondata Flashpro
17x7 +45 Enkei EKM3 Gun Metal
Function & Form Coilovers
Skunk 2 Rear v2 Gold Camber Kit
Gold Beaks Lower Tie Bar
Mugen Lip Kit
VIS RR Carbon Fiber Hood
JDM Honda Badges
Interior Modifications
Simulated Carbon Fiber Interior Kit
XLR8 Gauge Pod
Red Recaro Door Inserts - waiting to install
Password JDM Shift Knob (Stainless Steel)
Blox LCA's
Modulo Spoiler
When I installed the suspension. Function/Form Type 2 Coilovers w/ Skunk 2 V2 Rear Camber Kit.
Blox LCA's
Rotrex
KW Intake Mainifold
Intercooler
Fuzion777 Kraftwerks Powered Civic Si on Import DPS Dynojet - YouTube
Tuned w/ low revving because of the new motor. Did 378whp 238tq w/ stock cams. I have to get an updated Dyno session and Retune with the Drag Cartel 2.2 Cams
Taken the day before the install. No intercooler.
1/11/12
Found out why my motors kept blowing. Bad Valve Cover. It was sandblasted incorrectly. It was FULL of sand. That's why my 1st cylinder kept going and blowing my bottom ends. Back to my stock for now till I get my wrinkle black oem done. I also changed my intake to red. Not sure if I like it. I may go back to the original look. All wrinkle black.
New Valve cover
Modulo Spoiler is ready for install.
Modulo Spoiler on with a fresh painted bumper and side skirts. 3/2/13
This car has been through 3 motors in 3 weeks. I'm finally on my last one and it's running strong. The reason the others blew was because the sandblaster who did the wrinkle black valve cover left a huge chunk of sand under the bezel and it was going straight into my first cylinder. smh My Builder at 4130 Performance and Fabrication decided to take the wrinkle black valve apart because he was wanted to know exactly why the 1st cylinder kept frying and found all that sand in there. I finally bought a JDM Red Valve Cover and it was smooth sailing from there. Thank God!
Empty Bay
Here's some pics of the damage and the new/last bottom end.
Last Bottom and FINAL one. lol
Newest pics of the bay.
http://www.flickr.com/photos/95003917@N03/8655919245/
Honda Day 2013 at Atco Trophies
Made Super Street June 2013 issue
superstreet by Raizo777,
boostedk20.com decal new
7/27/13 Finally installed my Recaro Door Panel Inserts.
Untitled
Untitled
Untitled
Untitled
Untitled
Untitled
8/13/13
Just finished redoing the underside of my hide. Much cleaner! I have more mods but the decals are just a little too big. Gotta get them done a little smaller.
Some pics from 2 weekends ago. 2 Shows, 2 Days, 3 Trophies!
"People's Choice" at Game Changers Summer Bash
Best Stance and Best of Show at The Boosted Life!
I'll update this when I have some more free time....
Last edited by Raizo777; 09-02-2013 at 02:03 PM.
Pics to come... just got to upload new pics.
Updated..... I'll post more pics and more when I have more free time.
Sub'd for more. I like the red vc with wrinkle black intake, its similar to my intercooler pipes as I also have the type r valve cover. That sucks you went through so many motors for something stupid like that! Is the current motor all stock other than cams?
Yeah, man! Everyone thought I couldn't drive. lol Thanks! I like the Red a lot better than the wrinkle black valve cover. It just stands out better. Yup, the current motor is all stock except for the Cams, Springs and Retainers. I plan on building the bottom after I do the front and rear conversion with more aggressive wheels. I'm looking into painting the car a different color, as well. I'm keeping the engine bay red, though. We'll see....
Made Superstreet's May 2013 issue
superstreet by Raizo777, on Flickr
thats lovely!!!
Props for your build. Sorry to hear about your engine. Would you know how much sand was left in your engine?
Thanks, Everyone! Just made a switch from the Deatschwerks Fuel Pump to a Walbro 255 and lovin it!
absolude, I have no clue exactly how much but I do know it was a pretty big amount.
Added a www.Boostedk20.com banner to support this forum.
boostedk20.com decal new by Raizo777, on Flickr
Bookmarks