We haven't posted an update for quite some time so we figured it was a good time since we are completing some of the larger parts of the project.

To start off , we purchased and began putting together our air to air intercooler setup. It is based off a Garrett core rated to handle 1260hp. Obviously airflow won't be as great as on a vehicle with a front mounted IC so the core is overbuilt to hopefully provide the cooling we are after. To move air through the core, a custom fan shroud was built to house 2 Spal 12" high performance fans. Hopefully the combination of the intercooler's size and the two quality fans drawing air through the core will be enough to keep our charge temps in check.













We also finally measured and ordered our DSS Pro Level axle setup. It uses a Porsche style inner joint and DSS's own outer joint/oversized hub. This particular kit uses a larger diameter intermediate bar, as well as a spool instead of a differential.





Also, the shifter cable/shifter box setup has already been figured out and we are in the process of ordering custom length cables from the good guys over at K-Tuned. We will post more updates as we go along.

Thanks for reading. :thumbup: