Page 1 of 2 1 ... LastLast
Results 1 to 10 of 13

Thread: Free k-pro datalog analysis

  1. #1
    Newbie
    Join Date
    Feb 2013
    Posts
    13
    Feedback Score
    0

    Free k-pro datalog analysis

    Hello BoostedK20, I am a professional e-tuner and have been helping the community for a long time. If anyone needs a second opinion on their tune or help with there tuning problems, just post up. Not a bad idea to have me take a second look at your already tuned cars, as I have seen many fully paid tuned cars not being used to the full safe potential that k-pro can offer. Most full throttle tunes work or look okay with awful part throttle response or vice versa. Most cars tuned on the dyno are not working as well as they could being that the dyno can not simulate wind resistance that your car has to overcome in third and fourth and higher gears. Its one thing to be on a dyno in a shop with the hood open and another actually using info from a datalog going 100mph plus on the street with the hood closed with the owner actually driving. Big difference! So, I'm here to help.

    You can post your datalogs and calibrations here, just attach them to your post with any questions you may have. I will post them back here, explaining what you can do to your tune so you can learn about tuning. Best of all, this is free to help the community
    Last edited by flipsx3; 03-01-2013 at 02:46 PM.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Newbie
    Join Date
    Feb 2013
    Posts
    13
    Feedback Score
    0
    Thanks for the review glad to clear everything up with the administrators. Glad to be helping the community.

  5. #3
    Senior Member SAX JONZ's Avatar
    Join Date
    Feb 2013
    Posts
    690
    Feedback Score
    0
    Ok, good deal flipsx3, I have to get a working laptop, apparently Mac isn't supported, I am having issues with part throttle, running like dogshit, then at other times just fine.
    I have a rotrex charger and read that closed loop tune doesn't always work well with boost. Should I be running an open loop or is it perhaps a faulty TPS? I know you can't say until you get info from datalog. Will be uploading soon. But generally speaking...closed vs open?

  6. #4
    Newbie
    Join Date
    May 2013
    Posts
    47
    Feedback Score
    0

    Free k-pro datalog analysis

    I know this wasn't directed to me but I can give my experience. I'm not fully finished my Etune but I'm running a c38-81 on a k20a2 and when closed loop is on it seems worse, the car struggles to find a 14.7 it seems to hurt power, and runs much smoother in open loop. Again I'm only tuned on the low cams but that's been my real world experience


    Sent from my iPhone using Tapatalk - now Free

  7. #5
    Senior Member SAX JONZ's Avatar
    Join Date
    Feb 2013
    Posts
    690
    Feedback Score
    0

    Re: Free k-pro datalog analysis

    Thanks 04CC. That's just what I was looking to hear. Now I just have to get my laptop working. Still in disbelief that kpro doesn't support Apple. Not tgat I'm a mac fanboi. But it stands to reason. Would be damned cool to be able to hook up a smartphone to datalog. I have the antique version. If I need to I guess I could send it out to "update"

  8. #6
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    I need help...

    My MAP is not reading boost. I have a GM 3bar and I have been trying ever setting and it runs like shit on all but one... Neetronics 2bar. But with this setting it sees no boost.
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  9. #7
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)

    Re: Free k-pro datalog analysis

    Sounds like wiring

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  10. #8
    Senior Member SAX JONZ's Avatar
    Join Date
    Feb 2013
    Posts
    690
    Feedback Score
    0
    Speaking of analyzing Kpro, what does everyone think of the new Bluetooth version that came out? Was thinking of upgrading as mine is the first version that doesn't have datalog capabilities. When attached to laptop can barely datalog more than ten seconds.


    Sent from my iPhone using Tapatalk

  11. #9
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Sounds like a necessary upgrade for you! I'm good with Flashpro non-bluetooth as I'm in school and don't have the time to tinker with cars right now. But if I was doing updates frequently, I'd go bluetooth

    Sent from my SM-G900T using Tapatalk

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  12. #10
    Senior Member SAX JONZ's Avatar
    Join Date
    Feb 2013
    Posts
    690
    Feedback Score
    0
    I think I'm going to do it.


    Sent from my iPhone using Tapatalk

Page 1 of 2 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •