Reply With QuoteCouldnt u pull the codes on flashpro
Alright so finished the car up today, only one issue I've spotted thus far, should be rather minor... My abs and vsa lights come on after I turn the wheel a decent bit in either direction, and stay on until I shut the car off for a long enough period or reflash the ecu. I still have power steering, and the car drives just fine, in fact I drove it home from my mom's house with no issues. I'm actually taking the car to my local shop tomorrow to have him check what codes it's giving and take a look at the power steering wires along the subframe. It will be much easier for him to mess with them as it will be on a lift, for me to access them I pretty much have to lower the subframe in the rear a little and I just don't feel like doing that today and need to get this thing road ready by Friday. Also need to order brakes!
Couldnt u pull the codes on flashpro
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Not that I could figure out. The codes aren't CEL codes, they are gonna be in a different system is my understanding. Also flashpro kinda sucks for pulling codes, I've done it twice before, and the one time it didn't give me any useful information, it just said I had a code, which I already knew lol. Took it to pep boys and found out it was a knock sensor codeOriginally Posted by monjarassi
Well car is back from shop, turn out the right front speed sensor would work just fine until a hard right turn was made, then it wouldn't work at all until the sensor was unplugged and plugged back in or the codes were reset some other way. But fortunately a new speed sensor fixed the problem, which is a little weird since visually, there was no evidence that the wires were pinched or pulled, even with the wheel turned all the way to the right. But glad it was a simple fix! Time to finish breaking in the motor and start tuning.
thats good to hear
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Well car made it to and from dyno day with no glitches, 80 mile trip each way. I now have right around 250 miles on the motor, time to start upgrading the fuel system...
Thats good news. I'm at 600 miles now. Yay
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Nice, about time to start having fun for you!
Fuel upgrades are costly but fun#
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Ya I'm just adding a fuel return, nothing crazy. I already have all the parts I need minus 3 fittings I'm waiting for. It's going to be a -6 feed to the stock rail and use the stock line as the return line.
Posting Permissions
Bookmarks