Quote Originally Posted by aLmk View Post
Ok did you delete the AC cooler that sits in front of the radiator? I was messing with my piping today to get better clearance in my wheel well, so I had my bumper off and I was looking at mine at comparing it to your picture. I'm just curious how you got 2, 2.5'' pipes to fit in that spot right off the intercooler. I can see you removed the plastic shield thing, but even with that gone I'm not sure there would be a whole lot of room. Tough to tell in that photo if the AC cooler thing (sorry don't know technical name) is there.

Gotcha, makes sense.

And I was able to get a bit more clearance in my wheel well, and my wheel was not hitting the fender liner on a full right turn, I just hope it also has enough clearance for 15x8 wheels with 24.5x85 slicks.
No the a/c condenser is still there, after the plastic was removed I ground out the corner sheet metal and then capped and welded a plate over the ground down part of the core support for support . Hard to explain but ill see if I can find the pictures I took with my dslr .