New guy here! 600whp or bust build

[1SLOWFG2]

If I sleeve a block ill do a k24 frank build

[aLmk]

Cool. It seems that sleeving and boring the motor to 88mm and keeping near stock compression can make great power.

[boosted_teg]

you could always send your block to that company that does pressed in block guard. I forget their name, but roughly 350 dollars. They remove material and add in about 1+" guard.

[aLmk]

It's been argued that block guards aren't that helpful. IMO either sleeve it or don't.

[1SLOWFG2]

you could always send your block to that company that does pressed in block guard. I forget their name, but roughly 350 dollars. They remove material and add in about 1+" guard.

Yeah I would rather spend the extra money and just have it sleeved. I've read that stock sleeved have been good up to 700-750 hp so my measly 600 goal should be ok

[Si Speed 317]

Nah not on this car , I have 3 k20z3 blocks and a whole other z3 swap and 4 k-trannys so if it pops then ill slap a bitch. ill make the power on the Dyno but most likely turn it down for street use. Since even at 460 traction was pretty limited lol .

Glad to see the new build - for your wife! Shes quite lucky, lol. Post more pics! Motors, trannys, etc

[Si Speed 317]

Cool. It seems that sleeping and boring the motor to 88mm and keeping near stock compression can make great power.

Boosted k-series setups are never boring and never sleep.

[aLmk]

Boosted k-series setups are never boring and never sleep.

LOL that was supposed to say SLEEVING and boring as in boring out the cylinder chamber haha.

[1SLOWFG2]

Goodies waiting to go in

ImageUploadedByTapatalk 21361894901.151393.jpg

ImageUploadedByTapatalk 21361894924.253554.jpg

How the bay looks right now

ImageUploadedByTapatalk 21361894948.769908.jpg

Doing work

ImageUploadedByTapatalk 21361894996.485225.jpg

Can't wait to get this in!!!!

[1SLOWFG2]

I have tons of pictures but I moved then all to my computer as my phone was full ill get some up later