Quote Originally Posted by E-Tunez View Post
No problem, we don't usually give freebies, but seeing we havn't done anything for BoostedK20 for awhile, this one is on the house. Its just a basemap of course, so will require more work for sure. Had tuned one of these on the rollers last year, near identical build so should be close, reset some parameters for safety. Recommend 4 bar sensor, be sure to calibrate TPS. As always, all maps are for offroad use only, there are no mechanical guarantees, please review parameters before uploading, please check our site for the legal disclaimer, etc.

Etunez custom tune for: Boosted K20

Type: Offroad use only.

Car: K20 PRB
Modifications:
SD Based intake
5858 Turbo
ID 1000cc injectors, standard latency.
Assumed 48psi +/- 5psi fuel pressure assumed.
Free flowing Exhaust
Fuel: 93 Octane 10%E assumed.
Elevation: 500ft ASL assumed.

Rev1: Custom fueling, ignition and VTC for a PRB K20 turbo build, Assumed stock MAP sensor, recommend 4 bar.
Quote Originally Posted by mnc1408 View Post
Thank you so much boys,

I will upload the courtesy map supplied by e tunez with adjusted parameters. Will post up a few minute data log tomorrow.

Thanks again to the community [MENTION=1]BoostedK20[/MENTION].
Quote Originally Posted by E-Tunez View Post
For sure, hit us up at tuning@e-tunez.com and I will help you out, I don't get a chance to check these threads very often. Filedropper isn't displaying the security code properly for me to download that file, so if possible just zip or rar it up and send it over

Steve

PS Checkout www.7zip.org if you need a good compression tool.
[MENTION=158]E-Tunez[/MENTION], thank you very much for this courtesy! Great customer service speaks volumes about a company.

A big thank you to everyone in this thread for showing love and support for this awesome build and builder all the way in Australia!! [MENTION=334]mnc1408[/MENTION] Contact E-Tunez with your datalog via e-mail as requested and let us know how things work out! Looking forward to this!