Got my Jdm k20a flywheel machined.





Picked up a spare gearbox my cousin didn't need. It's a Dc5 5 speed box with a cusco 1.5 way lsd and a spoon 5.1FD. The gear ratios are similar to a 98 spec itr gearbox but taller 2-3-4. Ideally I would like slightly taller gearing but I will work with what I have







headed down to my local automotive store to pick up some supplies.

*Primer and paint for the gearbox
*wire brush and degreaser to prep the gearbox
*thread lock for the flywheel and pressure plate bolts.





Positioning this lump of metal for its makeover.





Ass shot for some motivation.