Reply With QuoteHoly shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
Skunk2 90mm ;-)Originally Posted by monjarassi
Oh yea!! -10 AN on both ends with a -10 line feeding and a -8 return line :-)
We're shooting for some 700s so hopefully with all this we'll get there!!!
Holy shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
Last edited by Si Speed 317; 10-15-2013 at 12:41 PM.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
the way it works is the -10 feed line pulls from both pumps at the same time and then it return fuel on the -8 no dual lines required
Did you already get your exospeed 3 piece front for the car? Ive been hearing a lot that exospeed is no longer making the fronts, but CMR is making a similar?
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
Not yet, waiting on my friend to bring it by so i can mock it up
SOOOOO ANXIOUS TO SEE IT ON TOO!!!
Had to tap and weld a small fitting to my Magnus for vacuum.... It didn't come with one.... Da fuq...
On a different note, I may be selling my Magnus over the winter and getting a Skunk2 Ultra Series to replace it
Sent from my SAMSUNG-SGH-I717 using Tapatalk
S2....... why??
The s2 ultra is a Kinsler copy. Evidently is out preforming everything else out there
s4 IG-petefromthestreets
Tire slayer
Breaking everything since 2011
I like it's design and I've been wanting that one for a minute, but with Ks the manifolds that are proven are the Gato's, GE's, Prayontoo and Magnus so I might step it up to a Gato Center Feed or a Prayontoo Center Feed
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Bookmarks