Now onto the inside... this part is scary so I am taking my sweet time. But damn I got the hang of it quick and really starting to make some progress!
First I started sanding everything with 60 grit like the cover...you really start seeing the shit castings...
And after some sanding
Now onto the tough part... Using Carbine Bits for Aluminum I started sculpting and shaping. Lots of high spots and flat spots.. plenty of room for improvement
Then started sanding it back down again
Then used a 6" extension to start cleaning the insides
Here's some progress
80 grit
And for a teaser I tried 120 grit
Looks at the difference!
Bookmarks