you can ebay the mac solenoid with barbs for like $30 shipped.
i got one.
A friend of mine had posted this information up, but was too lazy to post it here. So here you go boost buddies
Hondata wants $100 for a MAC solenoid with a Hondata sticker on it, which is cheap compared to all the EBC's on the market. Now is it really cheap? Many people have the solenoid from their AEM Tru-Boost wired in and they work just fine. In the end, the Hondata/MAC solenoid part number is 35A-AAA-DDBA-1BA. You can only get one from one of MAC's local distributors, for some reason MAC doesn't allow them to sell across state lines. Welcome to MAC Valves
Once you did that, all you need are the two 1/8" npt x 1/4" barbs and a muffler. Xenocron Tuning: PWM Solenoid Fittings kit Don't forget! You'll need to get the pins from Hondata. http://www.hondata.com/civic_pin_request_info.html I got the 10A mini-blade fuse and holder for about 5 bucks from my local radio shack and you'll need a ring terminal for the ground wire, i grounded mine with the ecu ground on the head.
Hopefully some fellow boosters can save some money here!
you can ebay the mac solenoid with barbs for like $30 shipped.
i got one.
How did it work? Never heard of that
Buddy i know works for the City and is a mechanic on fire trucks, dump trucks etc. Hes got a ton of these mac valves and gets them all the time from his work. Like you said, AEM/hondaata is nothing but a badged MAC valve. Even fittings can be picked up local for a lot cheaper then 30 bucks.
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
Now there's a 4-port out, VitViper runs one on his car. He LOVES it from what I've seen. Any info on those?
^I just saw something about the 4 port but no info. Also in for my info
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
Supposedly it works great for keeping the gate shut when you need it to, especially with a small psi spring (4-5psi) and a high max boost
Yeah allows you to get 20+psi out of a 3 psi spring.
We need to get some serious info on these ASAP.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Im running the 3 port solenoid from grainger with no issues especially with quick spool. $38
I had the "hondata" solenoid but thought it was bad because I was not getting much boost control.
Found out the hondata solenoid was fine. The problem was I had a frayed wire.
Sent from my Galaxy Nexus
Bookmarks