Page 5 of 8 FirstFirst ... 5 ... LastLast
Results 41 to 50 of 80

Thread: My boosted K24 EM2 -JDL-Precision-Hype lug- W2A intercooler-Ktuned

  1. #41
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    The side port on my valve cover is vented to atmosphere via little k&n filter.I modified the underneath of the valve cover to also vent to the catch can via the back 2 ports. I drilled out the inside baffle tray, attached a "link" from the 2 back -10an fittings between the inner valve cover wall hole and baffle tray "wall" (which i drilled 2 holes into this wall) and then rewelded the baffle tray back in place. Basically my rear vents act as the same as the vent on the side of the valve cover.

    Hard to explain but it works good. Any ventilation i can get will save my rings once push more then 600whp+.

    this is how i got mine set up


    I can't seem to find the link/picture/discussion on k20a regarding the 2 ports being welded on the block to vent the crank case. *shrugs*
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  2. #42
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  3. #43
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    My boosted K24 EM2 -JDL-Precision-Hype lug- W2A intercooler-Ktuned

    Do you have a picture of the Inside of your VC how you modded it? I'd like to see.
    Tire slayer
    Breaking everything since 2011

  4. #44
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    unfortunetly no. Maybe come spring when i take out the motor.
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  5. #45
    Senior Member fre$h si's Avatar
    Join Date
    Mar 2011
    Posts
    299
    Feedback Score
    0
    with the a2w set up do u still get creep when it gets cold out like ive been getting with my a2a

  6. #46
    Senior Member fre$h si's Avatar
    Join Date
    Mar 2011
    Posts
    299
    Feedback Score
    0
    any updates?

  7. #47
    BoostedK20 Sponsor bodyman's Avatar
    Join Date
    May 2012
    Location
    Autofair Honda
    Posts
    116
    Feedback Score
    0
    Hey guys, nothing special here. Wallet is dry but it's running and out of the garage, needs a lot more parts still and tuned, but at 8lbs it rips!

  8. #48
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    Re: My boosted K24 EM2 -JDL-Precision-Hype lug- W2A intercooler-Ktuned

    Looks great man. What are you iat's with the water/air intercooler?

    s4 IG-petefromthestreets
    Tire slayer
    Breaking everything since 2011

  9. #49
    BoostedK20 Sponsor bodyman's Avatar
    Join Date
    May 2012
    Location
    Autofair Honda
    Posts
    116
    Feedback Score
    0
    Thanks Adam

    I literally ripped it 3 times down the street and back and here we stand. I have a new fuel pump to install. The stock one is still in there believe it or not. Ill post more next week

  10. #50
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)

    Re: My boosted K24 EM2 -JDL-Precision-Hype lug- W2A intercooler-Ktuned

    Looks great, Ryan! I love that turbo manifold. Screams Function > Form. And the IM is nice too. I enjoy my sleeper IM myself

    I've always loved and still wish to have an EM1 project car, and I've always loved the EM2's body wise, but their powertrain blew. You made it right man. I look forward to more of this build!

    Fittings look great, make sure to be careful and not knick em up! They make my wallet dry too :sadbanana: I also need to post a write up of nylon braided vs SS line. Nylon typically needs to be changed every 2-3 years, and SS lines usually 10-12. I'll explain in a thread soon.

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

Page 5 of 8 FirstFirst ... 5 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •