Supercharged CHAT Thread

[bulliedog]

i also saw the new eaton supercharger on mercracing site.. how well do you think this will be compare to our old skool jackson

Well it is a more efficient roots style blower. They call it a hybrid between the TS and a true roots style blower. The biggest advantage with running the TVS over a Whipple is the internal by-pass. They sized a little different and until there are a few out there putting down numbers it will be harder to tell what size to actually compares to past Whipple or bigger roots style blowers.

[scfg206]

Need to know what size belt to use for my 06 civic si Jackson racing supercharger setup with 3inch (2.95in) blower pulley by Merc racing and crv crank pulley...need to know what belt size I need for this combo. Any info from anyone running this setup would be great thanks.

[bulliedog]

Need to know what size belt to use for my 06 civic si Jackson racing supercharger setup with 3inch (2.95in) blower pulley by Merc racing and crv crank pulley...need to know what belt size I need for this combo. Any info from anyone running this setup would be great thanks.

mostly no one is really going to have that info do to people normally go with the 6.37" pulley. You could try a 61.5" and go from there. Make sure you put it on by the crank pulley, not the blower pulley.

[beppe]

which header shall i use? gonna be used with my JRSC at 10psi

Toda = Tegiwa copy
Kiddracing = Plm copy

Plm will mate up to a custom exhaust easy, and has 4in longer primaries

[bluEP3_SC]

which header shall i use? gonna be used with my JRSC at 10psi

Toda = Tegiwa copy
Kiddracing = Plm copy

Plm will mate up to a custom exhaust easy, and has 4in longer primaries

I like my PLM. I have it mated to a custom 3in exhaust and it has supported over 400whp with the jrsc. Best bang for your buck if you ask me.


Sent from my iPhone using Tapatalk

[beppe]

I like my PLM. I have it mated to a custom 3in exhaust and it has supported over 400whp with the jrsc. Best bang for your buck if you ask me.


Sent from my iPhone using Tapatalk

great thanks... hows the k20a swap going?

[PetefromtheStreets]

Have you guys read about that 627whp supercharged accord IMW tuned? Absolutely insane. 29psi!

[bluEP3_SC]

great thanks... hows the k20a swap going?

It's pulling hard. Adding a TSX crank pulley this winter along with a new progressive meth controller and a custom 3.5in cold air intake with a larger meth nozzle. How's yours?


Sent from my iPhone using Tapatalk

[bluEP3_SC]

Have you guys read about that 627whp supercharged accord IMW tuned? Absolutely insane. 29psi!

Yea Tim has created a monster. I've been following his accord since his mild m62 build days. That car is a beast


Sent from my iPhone using Tapatalk

[PetefromtheStreets]

Yea Tim has created a monster. I've been following his accord since his mild m62 build days. That car is a beast


Sent from my iPhone using Tapatalk

Yea I just found out about the car. Its definitely a beast. Im pretty jelly of them power numbers. Lol