that manifold looks great. Amazing you get it to fit way back there...
Many people have been asking me for pictures of my manifold, so I figured I'd just make a thread to make life easier. Originally designed on Roger's Si (07civicmd), also known as the Swift Racing Technologies (SRT) shop car owner, I am the second owner of this manifold. Roger was the record-holding highest horsepower Si with this manifold, before they made their next kit (which is what he uses on his car now). What made it appealing to me was the fact that it's a top-mount manifold. At the time, sidewinder manifolds weren't made for Si's. (Companies that tried said it would be impossible to fabricate correctly given the minimal space between the firewall and cowl plate. Time proved that to be wrong.) So, I wanted the turbo to be seen with the hood up, and I couldn't achieve that with a bottom mount manifold.
I am the second owner of this manifold. Once Roger swapped over to the new manifold and made even more power than before, I needed to have this one. Here she is:
Before JotHot coating:
After JetHot coating:
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
that manifold looks great. Amazing you get it to fit way back there...
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
Did you ever fix your boost creep?
I have boost creep because of the divorced wastegate setup from the turbo. It used to spike to 19psi on a 4psi spring, now it's down to 11psi. Hopefully, with some motivation over the winter, I'll take out the turbo a third time and redo it correctly. If I can get down to a 7psi creep I'll be happy. Just as a note: The creep is not due to the manifold. The manifold has no wastegate port. This is due to the hot side.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
So you need a different turbine housing? Or an efr turbo
Nope, the hot side I use is a Ford 5-bolt internal/external wastegate housing.
Bored the hole out, but I directed the flow in the opposite direction, partially because I rushed and mostly because it was 4am and I was dead tired. Didn't realize till I put everything back together and did a test run. Debated getting an EFR, but I love the sound of open wastegate
Last edited by Si Speed 317; 09-27-2012 at 11:23 AM.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Doode with the EFR all u hear is late spool. Open waste gate is fckn amazing.
Late spool of an EFR turbo is an oxymoron
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Sick manifold, and links to see the installed setup?
This is while I installed my oil relocation kit
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Bookmarks