Results 1 to 6 of 6

Thread: FREE Flywheel holder tool

  1. #1
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    FREE Flywheel holder tool

    So guys, a couple days ago I was going through my tool box and happened to find a bracket that I took off my transmission a while back.



    And thought to myself this Would work great vs paying 25 bucks from crsx.

    So I took and cut out the material between the two existing holes. ImageUploadedByTapatalk1348119321.599983.jpg



    ImageUploadedByTapatalk1348119380.618261.jpg

    Then ground the tab into a shape of a tooth like on the flywheel.


    ImageUploadedByTapatalk1348119458.810499.jpg

    Found some washers and a bolt and nut and you slide it through the rear lower hole for a trans bolt to go.

    ImageUploadedByTapatalk1348119592.481979.jpg

    And your washers are meant to space the tool away from the engine block to line up and mesh with the flywheel teeth.
    ImageUploadedByTapatalk1348119811.151732.jpg


    I had to place a little angle on the holder for it to work properly but that was no issue. It worked like a champ.

    Hope you guys enjoy.
    Tire slayer
    Breaking everything since 2011

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    very nice! I actually looked into making one for real myself. Love the creativity

  5. #3
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Quote Originally Posted by Spaz View Post
    very nice! I actually looked into making one for real myself. Love the creativity
    Thanks man. Was a simple solution that took 10-15 minuets maybe and didn't cost me a dollar compared to the 25 dollar tool off kseriesparts.com
    Tire slayer
    Breaking everything since 2011

  6. #4
    Senior Member
    Join Date
    Mar 2012
    Posts
    802
    Feedback Score
    0
    Good job man.

  7. #5
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    That's awesome! Reminds me of the Ruckus forums, there are so many DIYs for free stuff like this. Gotta love it. Repped for ingenuity

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  8. #6
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Quote Originally Posted by Si Speed 317 View Post
    That's awesome! Reminds me of the Ruckus forums, there are so many DIYs for free stuff like this. Gotta love it. Repped for ingenuity
    Thanks man.
    Tire slayer
    Breaking everything since 2011

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •