Sry that was for oneslowfg2
Sry that was for oneslowfg2
Please be aware your log manifold only has a t25 flange (very small) so that big turbo will not mount to that manifold and will not fit with an adaptor (would hit cowl) also those large turbos are designed for use with an external gate which your manifold doesn't have. And where have you seen log manifolds make 500hp on a k series?
And idt I have a boost leak. Pipes are welded. I just think that Dyno was garbage bc my car pulls a lot harder than 268. If I really have 268 than 400 will unbolt my damn seat
What turbo manifold are you using? The leak could be in so many places, could be a loose coupler connection. Unless all your charge pipes are welded together? Which if they are, that's is honestly dumb as fuck...
Bad idea.
This
So if your pipes are welded, theres no chance of a leak? You yave no coupler connection points, no couplers for your intercooler? No vac lines?
Right, what manifold are you using? Pat, my .02 is that you're being cheap in the wrong ways. You cheaped out on a turbo. No bueno. But you not only cheaped out on a turbo, but a manifold too? And now you're willing to buy a big turbo (which needs a t4 single or twin scroll flange) on a smallsmallsmall T25 flange? Not to mention the turbo won't even fit
I very strongly suggest you rethink things. We're trying to help, and you're not listening very well. You get what you pay for in every aspect of life. There are budgets and ballers, but in the end there is one timeless concept that one should always abide to:
Fast - Reliable - Cheap.
Pick two.
If it' fast and cheap, it's not reliable. If it's reliable and cheap, it's not fast.
If it's fast and reliable, it's not cheap.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
No I'm listening. I admitted I went the cheap route. I've talked to comp turbo he said it would fit. Idc at this point bc I'm about to trade it with a guy for an s2000. Want something rwd. Probably end up doing a k20 swap in it and turbo it the right way this time around considering this was the first time and it was a learning experience.
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Yea. I just want something rwd but wanna stay with honda. It's got 142k miles on it but its guna be a daily and that's it for a year or two
I wouldn't trust the guy at comp telling you it will fit. Not that he doesn't know what he's talking about turbo wise, but I doubt he knows anything about this chassis specifically. Also why k swap an s2000? The f motor that is in it, is really strong and makes great power as well.
Bookmarks