500whp or bust!

[VTECFRED]

Sweet! I bought a Transmission with a TSX 6th gear. I'm going to swap in a 4.3 final drive then send the gears off to be shot peened and then send them off to cryogenically treated

As long as they last me a year from then I will be happy lol

Sent using my Galaxy S3

[snizzletoff]

Sweet! I bought a Transmission with a TSX 6th gear. I'm going to swap in a 4.3 final drive then send the gears off to be shot peened and then send them off to cryogenically treated <br />
<br />
As long as they last me a year from then I will be happy lol<br />
<br />
Sent using my Galaxy S3

I'm pretty interested to see how long these gears last! I wish I would have shot peened mine but o well. I'm thinking about going with an rsx 5 speed if anything happens. Will probably switch over my treated final and shot peen everything

Sent from my EVO 3D with Tapatalk 2

[Si Speed 317]

Where did I read about... a 5 speed ep3 tranny fitting in our cars? Idk if it was this thread or mot, but I want to look into a new tranny as a back up for the current one. Lets start a best bang-for-your-buck tranny thread

[aLmk]

A guy on 8th swapped the 5 speed gears over.

[Si Speed 317]

A guy on 8th swapped the 5 speed gears over.

Lets get that info over here!

[aLmk]

http://www.8thcivic.com/forums/turbo...-turbo-si.html

[Si Speed 317]

http://www.8thcivic.com/forums/turbo...-turbo-si.html

Aside from my full winter overhaul build on the Ruckus, fixing misc odds and ends on the Si, installing the fuel return etc on the Si, and tons of studying, I'll start to look for and piece together a side tranny just incase. Whats a good thing to do in terms of looking for them at junkyards? How do they go about taking them out of the cars?

I'll get this stuff moved out of this thread btw since its off-topic and crowding the build thread

[snizzletoff]

Where did I read about... a 5 speed ep3 tranny fitting in our cars? Idk if it was this thread or mot, but I want to look into a new tranny as a back up for the current one. Lets start a best bang-for-your-buck tranny thread

definatly need that thread, I can clear it up a bit. The ep3 trans is not direct bolt in the shift cable bracket bolts on differently and the speedo sensor is different. But the ep3 gears can be put directly into our case...just need a new countershaft bearing

Sent from my EVO 3D with Tapatalk 2

[Si Speed 317]

definatly need that thread, I can clear it up a bit. The ep3 trans is not direct bolt in the shift cable bracket bolts on differently and the speedo sensor is different. But the ep3 gears can be put directly into our case...just need a new countershaft bearing

Sent from my EVO 3D with Tapatalk 2

Here you go: http://www.BoostedK20.com/forums/showthread.php?t=584

[snizzletoff]

Build update, Got A LOT of parts ordered going to have a busy install day in the next week or so
Battery relocate kit
Distribution block to put under the hood for the relocate
Brake kit
Meyle Platinum rotors
stoptech pads
ate super blue fluid
ss brake lines
speed bleeders
Oil pressure guage
Rims/ tires- XXR 527 17x8.25 with Dunlop Z1 *specs 245/40/17
Vavle stems
Hub rings
New bright white fog light bulbs
Relay and wires to rewire my fuel pumps.
RSX 5sp transmission with 4.3 FD
Hondata Traction control

that is everything for now.