91' NSX Rejuvenation build

[Si Speed 317]

I posted it in the DIY application thingie place

Just saw it earlier, awesome thanks! I will rep you for the DIY when i'm on a computer

[06_typeS]

Got everything in and hooked up...... for the most part. The front coils are giving me some troubles. They are super close to the control arms. Im hoping after the car is lowered then they will clear with more room.

On with the pics.

[aLmk]

Did what I told you or the link help at all?

[06_typeS]

Not really. I'll try to adjust them this week.

[06_typeS]

Update. Took the car for its first drive of the year. All of 500 meters or so. We got the suspension installed on the car, however its not dialed in yet. For that im going to have to make a call to BRoycustomfabperformaceinc for his assistance. Next is hopefully new wheels and tires, and have a good 4 months of driving before the big move.

On with a few pics.

[06_typeS]

Bit of a small update.

After a lot of research there are not a lot of tire options remaining in NSX sizes (without setting off ABS/TCS lights). I have decided to just purchase a set of front tires for the time being, seeing how my rears are still in great shape. I went with the Yokohama S. Drives. I read some great reviews and seeing how they are fairly priced I decided to pick them up. They also make the size I want for the rear 265/35/18, so that will be good for when its time to order rears.

I also picked up a new right side front tie rod end and a set of 25mm spacers to hold me off until my rims reach state side for me to purchase. I decided to go with Enkei's new release for 2013. The Kojin in 17x8 +35, and 18x9.5 +30.

That's it for now. Hopefully inspection early next week and I'll be driving it once the snow all melts up.

[06_typeS]

Added the 25mm spacers in the rear and 15mm spacers in the front last night. Also installed the new tie rod end. Just waiting for the alignment tomorrow and then shes ready for SpeedSport and summer.

I still think the rear has to come down a bit and maybe the front end up a bit.

Pics!

Before:









After:

[snizzletoff]

Is that a gopro mount under your driver turn signal?

[06_typeS]

Yes it is. Good eye.

[06_typeS]

I got my fenders rolled yesterday thanks to BRoycustomfab&performanceinc. Had a small problem with the passenger side fender as it had a crack at the top and split a little bit more. I guess that gives me the excuse to get it welded and repainted.








Went to the store for diapers, then realized they didn't fit in the trunk. Huggies riding shotgun.



Also ordered new lugs for the wheels.