My a2 billet 6265 turbo build

[vdubkilla]

well winters here and cars going away in a dfew days, or should i say taken apart.

I sold my RBC, aem map, SKunk70mm tb today and picked up an AFI/90mm q45 TB off my buddys civic.





now i just need proyonto cams, twin disc, and some bigger injectors :P The never ending list has begun...again


my only problem, i dont think it'll clear powersteering

Really nice man one of these days I'm gonna upgrade my intake as well as I'm still on a completely stock rbc with a stock rsx tb I make good power considering but want more if only I could afford a built trans

[Frostydc5]

no need for power steering lol MANual steering for the win! love that throttle body and Intake Mani!!

[boosted_teg]

i know, its to find a manual rack. I had a loooped power steering rack and it was brutal to drive! I lvoe power steering, so easy to turn. 1 finger turning :P

thanks, i hope have it on come spring haha i dont even know if the altenator will fit or if i need a relocation kit

[BoostedK20]

[MENTION=83]vdubkilla[/MENTION] Built trans will be easier to buy in a week

[boosted_teg]

Really nice man one of these days I'm gonna upgrade my intake as well as I'm still on a completely stock rbc with a stock rsx tb I make good power considering but want more if only I could afford a built trans

id love to build a tranny... ppg 1-2 at least. Get that 60 foot down

[vdubkilla]

[MENTION=83]vdubkilla[/MENTION] Built trans will be easier to buy in a week

Yeah drag racing season ends and part out season begins

id love to build a tranny... ppg 1-2 at least. Get that 60 foot down

I've always wanted a built trans but wew $$$ I have done very well with ep3 transmissions at 550-650 hp only lost one 3 rd/4 th gear set since I've had the car .

[boosted_teg]

Thats actually not bad at all. *knock on wood* im still n the same tranny ive had for 4 years. PPG are sooooo much money

[BuBBaSBuBBLE]

I'm about to make a thread because I'm about to go insane. I having major boost creep issues with my car. How did you get your car to hold 12 psi? which spring do you have in your 44mm? I have a built k24 with a Bwr mani 44mm mvr with a gtx3582r. I just installed the 3 psi in my wastegate and 1st and 2nd gear is fine and than 3rd gear at upper rpms is still hitting the boost cut and its set at 18psi. smh!!! I have the 3 port but its not even hooked up at the moment. I can't get this car to hold wastegate pressure!! I need some help.

[monjarassi]

I'm about to make a thread because I'm about to go insane. I having major boost creep issues with my car. How did you get your car to hold 12 psi? which spring do you have in your 44mm? I have a built k24 with a Bwr mani 44mm mvr with a gtx3582r. I just installed the 3 psi in my wastegate and 1st and 2nd gear is fine and than 3rd gear at upper rpms is still hitting the boost cut and its set at 18psi. smh!!! I have the 3 port but its not even hooked up at the moment. I can't get this car to hold wastegate pressure!! I need some help.

Before you go crazy, please feel free to email my tuner for expert opinion and help he is well known to fix boost creep issues on our K series motors.

Brian @ speedlab.net

Make sure you mention martin sent ya.

[BuBBaSBuBBLE]

Sounds good I'll email him first thing in the morning. Thanks martin. -Sal