aLmk's 400whp budget build

[aLmk]

New build thread: http://boostedk20.com/forums/showthr...ed=1#post10248
I bought a used greddy kit last fall and I'm shooting for 400whp with upgraded turbo and accessories.

Comments, suggestions, and criticisms welcome!

Turbo Stuff

• Garrett GT 3076-iwg
• TSI manifold ceramic coated
• Fast-turbo oil return kit
• Greddy intercooler piping
• Greddy type rz bov
• SRT v.1 intercooler
• 3'' downpipe
• 3'' intake
• Omni Power 4 bar map
• MAC boost control solenoid
• AEM boost and wideband
• All new couplers and t-bolt clamps

Fuel System

• ID 1000cc injectors
• Walbro 255
• Crushed FPR
• Flashpro - Vit Tuned

Suspension

• Buddy Club N+ Coils
• Hasport Mounts - 62a
• Energy Suspension LCA bushings
• Ingalls camber plates and bolts
• Stock rims with 235/40/17 star specs

Misc.

• NGK iridium plugs - 9
• Omni Power CMC
• Hybrid Racing Cable Bushings
• TWM Short Shifter with bushings
• SS clutch line
• Exedy Stage 1 clutch
• Full-Race 3'' exhaust

All parts are on the car except for the turbo stuff, ID 1000ccs, and spark plugs. I will post pics over the next few days when I have time.


These should help...







First track night:

First pass:

Second pass:

Pump gas 93 e-dyno (no quick spool):

C16 race fuel e-dyno:

Dyno sheet from IMW dyno day 9/22/12. Pump gas 93 in 87* temps according to dyno:

[Si Speed 317]

to Looks good, I would personally go with the GT3076-iwg between the two. Better performance. I assume it's gonna be a GTX because you wrote GT 307X?

[aLmk]

No it will not be GTX series. The X in Gt307X was because I didn't know if I was gonna get the 71 or 76. However, I bought the 3076 earlier today from evans-tuning.

[Si Speed 317]

Good stuff, evans has the best prices on Garrett turbos. Congrats!

[aLmk]

Yeah I would have loved to use a GTX3071-iwg, but it was too much for me.... $1600 is a lot for a turbo. I wanted a good bit of money left over in case the worst happens.... it doesn't

[ksboi]

I would say get rid of that TSI manifold. But It looks like you got everything. What about that clutch?

[aLmk]

Why get rid of it? I don't need a $1400 full race manifold. I don't plan on building the motor, and I will still make 400whp with this. As for clutch I have an exedy stage 1 and I'll see how long that lasts.

Btw I bought a gt3076 from Evans. Shooting to have installed week of June 13th.

[aLmk]

First post updated.

[aLmk]

First post updated with a few install pics. Hoping to pick the car up tomorrow morning.

[Si Speed 317]

Awesome update, love the tires! I plan on running them when I need to re-up on tires. What's left on the build?

Why get rid of it? I don't need a $1400 full race manifold. I don't plan on building the motor, and I will still make 400whp with this. As for clutch I have an exedy stage 1 and I'll see how long that lasts.

Btw I bought a gt3076 from Evans. Shooting to have installed week of June 13th.

This is why:http://www.boostedk20.com/forums/sho...bular-Manifold