to Looks good, I would personally go with the GT3076-iwg between the two. Better performance. I assume it's gonna be a GTX because you wrote GT 307X?
New build thread: http://boostedk20.com/forums/showthr...ed=1#post10248
I bought a used greddy kit last fall and I'm shooting for 400whp with upgraded turbo and accessories.
Comments, suggestions, and criticisms welcome!
Turbo Stuff
- Garrett GT 3076-iwg
- TSI manifold ceramic coated
- Fast-turbo oil return kit
- Greddy intercooler piping
- Greddy type rz bov
- SRT v.1 intercooler
- 3'' downpipe
- 3'' intake
- Omni Power 4 bar map
- MAC boost control solenoid
- AEM boost and wideband
- All new couplers and t-bolt clamps
Fuel System
- ID 1000cc injectors
- Walbro 255
- Crushed FPR
- Flashpro - Vit Tuned
Suspension
- Buddy Club N+ Coils
- Hasport Mounts - 62a
- Energy Suspension LCA bushings
- Ingalls camber plates and bolts
- Stock rims with 235/40/17 star specs
Misc.
- NGK iridium plugs - 9
- Omni Power CMC
- Hybrid Racing Cable Bushings
- TWM Short Shifter with bushings
- SS clutch line
- Exedy Stage 1 clutch
- Full-Race 3'' exhaust
All parts are on the car except for the turbo stuff, ID 1000ccs, and spark plugs. I will post pics over the next few days when I have time.
These should help...
First track night:
First pass:
Second pass:
Pump gas 93 e-dyno (no quick spool):
C16 race fuel e-dyno:
Dyno sheet from IMW dyno day 9/22/12. Pump gas 93 in 87* temps according to dyno:
Last edited by aLmk; 02-25-2013 at 02:43 PM.
to Looks good, I would personally go with the GT3076-iwg between the two. Better performance. I assume it's gonna be a GTX because you wrote GT 307X?
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
No it will not be GTX series. The X in Gt307X was because I didn't know if I was gonna get the 71 or 76. However, I bought the 3076 earlier today from evans-tuning.
Good stuff, evans has the best prices on Garrett turbos. Congrats!
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Yeah I would have loved to use a GTX3071-iwg, but it was too much for me.... $1600 is a lot for a turbo. I wanted a good bit of money left over in case the worst happens.... it doesn't
I would say get rid of that TSI manifold. But It looks like you got everything. What about that clutch?
Why get rid of it? I don't need a $1400 full race manifold. I don't plan on building the motor, and I will still make 400whp with this. As for clutch I have an exedy stage 1 and I'll see how long that lasts.
Btw I bought a gt3076 from Evans. Shooting to have installed week of June 13th.
First post updated.
First post updated with a few install pics. Hoping to pick the car up tomorrow morning.
Awesome update, love the tires! I plan on running them when I need to re-up on tires. What's left on the build?
This is why:http://www.boostedk20.com/forums/sho...bular-Manifold
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Bookmarks