aLmk's 400whp budget build

[aLmk]

New build thread: http://boostedk20.com/forums/showthr...ed=1#post10248
I bought a used greddy kit last fall and I'm shooting for 400whp with upgraded turbo and accessories.

Comments, suggestions, and criticisms welcome!

Turbo Stuff

• Garrett GT 3076-iwg
• TSI manifold ceramic coated
• Fast-turbo oil return kit
• Greddy intercooler piping
• Greddy type rz bov
• SRT v.1 intercooler
• 3'' downpipe
• 3'' intake
• Omni Power 4 bar map
• MAC boost control solenoid
• AEM boost and wideband
• All new couplers and t-bolt clamps

Fuel System

• ID 1000cc injectors
• Walbro 255
• Crushed FPR
• Flashpro - Vit Tuned

Suspension

• Buddy Club N+ Coils
• Hasport Mounts - 62a
• Energy Suspension LCA bushings
• Ingalls camber plates and bolts
• Stock rims with 235/40/17 star specs

Misc.

• NGK iridium plugs - 9
• Omni Power CMC
• Hybrid Racing Cable Bushings
• TWM Short Shifter with bushings
• SS clutch line
• Exedy Stage 1 clutch
• Full-Race 3'' exhaust

All parts are on the car except for the turbo stuff, ID 1000ccs, and spark plugs. I will post pics over the next few days when I have time.


These should help...







First track night:

First pass:

Second pass:

Pump gas 93 e-dyno (no quick spool):

C16 race fuel e-dyno:

Dyno sheet from IMW dyno day 9/22/12. Pump gas 93 in 87* temps according to dyno:

[Si Speed 317]

to Looks good, I would personally go with the GT3076-iwg between the two. Better performance. I assume it's gonna be a GTX because you wrote GT 307X?

[aLmk]

No it will not be GTX series. The X in Gt307X was because I didn't know if I was gonna get the 71 or 76. However, I bought the 3076 earlier today from evans-tuning.

[Si Speed 317]

Good stuff, evans has the best prices on Garrett turbos. Congrats!

[aLmk]

Yeah I would have loved to use a GTX3071-iwg, but it was too much for me.... $1600 is a lot for a turbo. I wanted a good bit of money left over in case the worst happens.... it doesn't

[ksboi]

I would say get rid of that TSI manifold. But It looks like you got everything. What about that clutch?

[aLmk]

Why get rid of it? I don't need a $1400 full race manifold. I don't plan on building the motor, and I will still make 400whp with this. As for clutch I have an exedy stage 1 and I'll see how long that lasts.

Btw I bought a gt3076 from Evans. Shooting to have installed week of June 13th.

[Si Speed 317]

Awesome update, love the tires! I plan on running them when I need to re-up on tires. What's left on the build?

Why get rid of it? I don't need a $1400 full race manifold. I don't plan on building the motor, and I will still make 400whp with this. As for clutch I have an exedy stage 1 and I'll see how long that lasts.

Btw I bought a gt3076 from Evans. Shooting to have installed week of June 13th.

This is why:http://www.boostedk20.com/forums/sho...bular-Manifold

[aLmk]

Ok so I out everything back together and this morning I'm having an issue. Quick spool is working but as soon as quick spool reaches target boost my boost drops as if there is no boost control. Any thoughts? Note: I like an idiot had cut out my 3 port before realizing the actuator would not fit so I did have to solder it back in an the wires are a little shorter.

[aLmk]

First post updated.