Page 1 of 2 1 ... LastLast
Results 1 to 10 of 16

Thread: My Intro AKA Str8JDM 10 sec Honda Day Build

  1. #1
    Newbie
    Join Date
    Jul 2011
    Posts
    7
    Feedback Score
    0

    My Intro AKA Str8JDM 10 sec Honda Day Build

    Current Setup: 08 Civic Si Sedan, Stock Motor, Full Race turbo kit, Precision BB5857

    I had the plan months ago to rebuild my motor. i bought almost all the stuff and then summer came a long and i wanted a bike so bad. so i sold mostly all my stuff to buy a bike and didnt really care too much bout the civic anymore. it was running and getting me where i had to go.

    until last sunday. my dumb @$$ decides to do a 2nd gear still burnout and my poor car said it had enough. clutch doesnt engage anymore, car doesnt go into any gear, fml.

    so if the tranny has to come out, minus well take the motor out with it and continue with the build!

    Honda Day is at Englishtown, NJ on August 13-14th. planning to have the build done and the car slicked up to run.

    New Setup is coming hard!

    Engine:
    K20Z1 Block, OEM Sleeves
    86.5mm Wiseco 9.8:1 pistons
    Eagle HBeam Rods
    ARP Rod Bolts
    ACL Race bearings
    OEM 86mm Headgasket
    ARP Head Studs
    K20A2/Z1 oil setup
    K20Z3 Head, stock casting
    Ferrea 6000 series std size dish valves
    Supertech 100psi Duel Valve Springs
    Supertech Titanium Retainers
    IPS KT1 Cams
    Innovative 85A Motor Mounts

    Transmission:
    Jotech Stage 2 Transmission
    Competition "Stage 5" 4 puck sprung clutch
    OEM Flywheel
    OEM Axles

    Forced Induction:
    Full Race Turbo Kit
    Precision 6262SP, .82 Vband Hotside, .70 ported cold side
    Precision 46mm Wastegate
    Tial Candy Purple Blow off Valve to match Valve Cover, relocated to the current location on the IC pipes
    Full Race 3" Exhaust

    Fuel System:
    DW 300lph Fuel Pump
    Fuel return kit (-8 feed, -6 return)
    All black Cloth Braided Fuel Lines
    FueLab Fuel Filter
    FueLab Fuel Pressure regulator
    Golden Eagle Fuel Rail with Gauge
    Fuel Injector Clinic 1000cc Injectors

    Suspension and Brakes:
    BC Racing Coilovers (8k front, 10k rear)
    Rear SPC camber kit
    Purple Beaks Bar
    Hawk HPS Front and Rear Brake Pads
    Brembo Blank Front Rotors
    Goodridge Front and Rear Steel Brake lines
    ARP front Extended Wheel Studs
    Blackworks Racing Purple Extended Lug Nuts
    Team Dynamics 15x7 +35 Rims
    MH 24x8 Slicks

    Pics will start popping up in the next couple of days, maybe some later. Here we go!
    Last edited by Str8JDM; 04-17-2012 at 07:03 PM.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Newbie
    Join Date
    Jul 2011
    Posts
    7
    Feedback Score
    0
    THIS POST WILL INCLUDE ALL THE MOTOR BUILD PROCESS AND PARTS


    K20Z1 block stripped and ready for the machine shop




    K20Z3 head stripped and ready for the machine shop (picked up a head that only had 800 miles on it!)




    Crank back from machine shop all boiled clean and polished



    ARP Head Studs, wouldnt trust anything else


    Deatschwerks 300LPH pump, Walbro so last year..


    Wiseco 86.5mm pistons, 9.8:1 compression, Eagle H-Beam Rods, Upgraded Wrist pins



    Left: Standard Wrist Pin
    Right: Heavy Duty Upgraded Wrist Pin



    ACL RACE Bearings


    block back from machine shop ready to go!



    IPS KT1 Cams, Accord Type R Exhaust Gear




    Head back from the machine shop, all new guides, seals, and a mill job




    Competition Stage 5 Clutch


    Fuel System ready to rock (look for a fuel return DIY in about a week)


    Injectors came back from Fuel Injector Clinic, they were flow tested and cleaned, mint...


    Innovative 75A Motor Mounts


    EM1 CMC with Hybrid Racing Clutch Line


    Manifold With TSX Throttle Body


    Precision 6262S CEA



    Bottom End Built, ready to rock













    fuel cage all done, dw300 to -8 feed, -6 return







    Blow off valve location moved...


    Valve cover with -10 ports welded in for catch can...


    Candy Purple Powercoat!!


    BC Coilovers 8k/10k, Beaks Bar, 8mm Spacers for Slicks
    Last edited by Str8JDM; 04-17-2012 at 07:04 PM.

  5. #3
    Newbie
    Join Date
    Jul 2011
    Posts
    7
    Feedback Score
    0
    THIS POST WILL INCLUDE THE WHOLE SWAP PROCESS AND DIRTY WORK ON THE CAR

    What the car currently looks like before whole transformation






    Marking off the new blow off location with the new purple Tial. Thanks Full Race for changing up the design and leaving us with the crap design of the blow off hitting the radiator


    8/18/11: Motor Ready to be pulled out!



    9/1/11: Motor Finally out the Car





    12/10/11: Almost there
    That Gold wrap sucks! upgraded and protected...


    EM1 CMC upgrade..



    Innovative 85A, cant wait to sit in a vibrator...



    Turbo Stuff going back in...







    1/11/12: First Start Up!!!!


    1/19/12: Fresh Engine Bay




    Last edited by Str8JDM; 04-17-2012 at 07:05 PM.

  6. #4
    Senior Member 06_typeS's Avatar
    Join Date
    Mar 2011
    Location
    NB, Canada
    Age
    40
    Posts
    267
    Feedback Score
    0
    Nice, pics or car??
    Joe

    1991 Acura NSX


  7. #5
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    That's allot of money to spend In just over a month. Best of luck to you. I may see you in e town.
    Tire slayer
    Breaking everything since 2011

  8. #6
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Sick setup, great build. Car is fast as balls as it is, he's a local boost buddy of mine Do I see an Adm_rsx vs Str8JDM match on Honda Day?

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  9. #7
    Junior Member 420Coupe's Avatar
    Join Date
    Mar 2011
    Posts
    164
    Feedback Score
    0
    Do it!

  10. #8
    Newbie
    Join Date
    Jul 2011
    Posts
    7
    Feedback Score
    0
    Quote Originally Posted by Adm_rsx View Post
    That's allot of money to spend In just over a month. Best of luck to you. I may see you in e town.
    im not worried bout money. half the stuff is already there. ill be in 11.5 index but im planning on getting kicked out for no cage and breaking into 10s...

    Quote Originally Posted by Si Speed 317 View Post
    Sick setup, great build. Car is fast as balls as it is, he's a local boost buddy of mine Do I see an Adm_rsx vs Str8JDM match on Honda Day?
    thank you sir, i cant wait

  11. #9
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    That's cool with me. I'm in it for the sport and competition. I we line up that would be fun. I should be in that same class. And I too plan on getting kicked out. Lol. Best of luck to you to get her finished in time. Keep us updated.
    Tire slayer
    Breaking everything since 2011

  12. #10
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Any updates??
    Tire slayer
    Breaking everything since 2011

Page 1 of 2 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •